Weller SW1 Soldering Iron Switch Assembly, for use with TCP Soldering Iron

  • RS-stocknr. 662-074
  • Fabrikantnummer T0051020199
  • Fabrikant Weller
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

Weller SW 1 Replacement Thermostatic Switch

Introducing Weller’s SP 1 replacement thermostatic switch, this is designed for use with the TCP series of soldering irons. Incorporating the 'Magnastat' to allow magnetisation at low temperatures, which fade away higher temperatures allowing the switch to open.

This thermostatic switch is suitable for 50W soldering iron of the TCP Series. The temperature ranges from 260°C to 480°C.

Features and Benefits

• Power 50W

• 24V Operation

• 260°C to 480°C temperature range

• Compatible with TCP Series Soldering Irons

Spares & Replacements - Weller

Specificaties
Kenmerk Waarde
Model Number SW1
Soldering Accessory Type Soldering Iron Switch Assembly
For Use With TCP Soldering Iron
64 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
42,00
(excl. BTW)
50,82
(incl. BTW)
Aantal stuks
Per stuk
1 +
42,00 €
Related Products
The HAP200 Hot Air Pencil is used in ...
Description:
The HAP200 Hot Air Pencil is used in conjunction with the WR3M Control Unit. Nozzles are purchased separately (with latest listings shown on-line). These nozzles are also suitable for the HAP-1 Hot air Pencil.,SMT Nozzles fall into two groups:-, Type ...
Designed for heavy loads and can be used ...
Description:
Designed for heavy loads and can be used with a comprehensive line of thermally optimised, large diameter and high power soldering tip geometries. Uses Metcal SmartHeat® technologyThe two part hand piece - heater coil and tip design provides a low ...
The Antex XS25 range of 25W soldering irons ...
Description:
The Antex XS25 range of 25W soldering irons are straight-forward, robust tools. Perfect for hobbyists and DIYers, through to industrial and production uses, the XS25 soldering irons offer realibility over time. The simple, lightweight body helps to limit fatigue over ...
Introducing from Weller, the WHP 80 Pre-heating plate ...
Description:
Introducing from Weller, the WHP 80 Pre-heating plate is great for warming up electronic components and single-sided PC board assemblies. It's for use with WD 1/M, WD 2/M soldering stations or WR rework units. Pre-heating can reduce the thermal shock ...