RS PRO Solder Tab Terminal, Uninsulated, Tin Plated, Right Angle, 7.3 x 6.4mm, M5 Stud Size

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

RS PCB to Wire Terminal Tab Adapters

A range of PCB tab adapters that allow connection between wire terminals and PCB board via female receptacles. These PCB tab or PCB blade adapters have a 6.3 or 6.4mm tab size and are tin plated.
Stock number 534-929 has a 45° angle and an M5 fixing hole.

For use in making connection to printed circuit boards via 6·3mm push-on receptacles, stock no. 488-1235. Terminal material - hot tin dipped brass.Fixing hole for 45° blade M5.
For vertical and horizontal blades, fixing holes 1·5 mm dia. F.C. 5·08.Horizontal type only: first hole to be 5·5 mm from edge of board

Specificaties
Kenmerk Waarde
Tab Size 7.3 x 6.4mm
Tab Angle Right Angle
Stud Size M5
Insulation Uninsulated
Overall Length 17.8mm
Contact Material Brass
Contact Plating Tin
Colour Silver
Number of Tabs 1
Tab Thickness 1mm
Tab Width 6.4mm
11700 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
24200 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,085
(excl. BTW)
0,103
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
0,085 €
8,50 €
500 - 2400
0,074 €
7,40 €
2500 - 4900
0,064 €
6,40 €
5000 - 9900
0,057 €
5,70 €
10000 +
0,05 €
5,00 €
*prijsindicatie
Related Products
A 90° 6·3mm push on receptacle accepting wires ...
Description:
A 90° 6·3mm push on receptacle accepting wires 0·75 to 2·3mm2Suitable crimp tool, stock no. 488-1364The PVC cover may be fitted pre or post crimping, avoiding time delaying mistakes.
6.35-mm wide tab for PCB mounting with output ...
Description:
6.35-mm wide tab for PCB mounting with output perpendicular to the board.
Description:
2.8 mm, 5.2 mm and 6.35 mm wide tabs to receive the most commonly used Faston tabs.The small model (width 2.8 mm) can also be used as a "dagger" lug.Direct mounting onto printed circuit boards.
Description:
RS PRO MALE TERMINALS.