TE Connectivity Transparent Solder Sleeve 2.8 → 7.3mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Specificaties
Kenmerk Waarde
Minimum Cable Diameter 2.8mm
Maximum Cable Diameter 7.3mm
Sleeve Length 32.5mm
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Quantity 1
Colour Transparent
1400 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1500 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,867
(excl. BTW)
1,049
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 1400
0,867 €
86,70 €
1500 - 4900
0,823 €
82,30 €
5000 +
0,78 €
78,00 €
*prijsindicatie
Related Products
Clear, highly flame retardant, modified fluoropolymer, heatshrinkable tubing. ...
Description:
Clear, highly flame retardant, modified fluoropolymer, heatshrinkable tubing. It displays excellent clarity, when being used to protect bundle markers from severe mechanical and chemical abuse it is also excellent for strain relieving soldered or crimped joints. • Extreme clarity• Highly ...
The TE Connectivity 1.2m heat shrink tube displays ...
Description:
The TE Connectivity 1.2m heat shrink tube displays excellent clarity when being used to protect bundle markers from severe mechanical and chemical abuse. It is also excellent for strain relieving soldered or crimped joints. Approximately 40 percent thinner walls than ...
RW-175 heat shrinkable tubingTough semirigid thin wall insulationTranslucent ...
Description:
RW-175 heat shrinkable tubingTough semirigid thin wall insulationTranslucent polyvinylidene fluoride materialRW-175 provide electrical insulation and strain relief of multipin connectors and solder jointsUsed as insulation for high temperature components and heater leadsProvides protection from most industrial ...
Commercial Shield Termination with 22 AWG Preinstalled Lead. ...
Description:
Commercial Shield Termination with 22 AWG Preinstalled Lead. Heat Shrinkable radiation cross linked modifoed polyolefin materialThermally stabilized thermoplastic meltable sealing ringDesignd for termination of a bare or tin plated copper shield.