TE Connectivity Transparent Solder Sleeve 1 → 3mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Specificaties
Kenmerk Waarde
Minimum Cable Diameter 1mm
Maximum Cable Diameter 3mm
Sleeve Length 24.5mm
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Quantity 1
Colour Transparent
3300 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
37500 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
Was 0,69 €
0,587
(excl. BTW)
0,71
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 1400
0,587 €
58,70 €
1500 - 4900
0,557 €
55,70 €
5000 +
0,528 €
52,80 €
*prijsindicatie
Related Products
A 25 piece assorted kit of heat-shrinkable sleeves ...
Description:
A 25 piece assorted kit of heat-shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A ...
SolderSleeve coaxial cable terminators allow easy reliable terminations ...
Description:
SolderSleeve coaxial cable terminators allow easy reliable terminations for various coaxial cable applications. Insulation and strain relieving capabilities SolderSleeve terminators provide the ideal solution to centre conductor breakage problems. SolderSleeve coaxial cable terminators allow dependable economical ...
Commercial Shield Termination with 22 AWG Preinstalled Lead. ...
Description:
Commercial Shield Termination with 22 AWG Preinstalled Lead. Heat Shrinkable radiation cross linked modifoed polyolefin materialThermally stabilized thermoplastic meltable sealing ringDesignd for termination of a bare or tin plated copper shield.
Commercial Shield Termination with 22 AWG Preinstalled Lead. ...
Description:
Commercial Shield Termination with 22 AWG Preinstalled Lead. Heat Shrinkable radiation cross linked modifoed polyolefin materialThermally stabilized thermoplastic meltable sealing ringDesignd for termination of a bare or tin plated copper shield.