TE Connectivity Transparent Solder Sleeve 1.3 → 2.7mm

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: MX
Productomschrijving

CWT 38 braided cable terminals

These terminals allow earth tags to be created on shielded cables.
Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.
The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a fluxed solder ring and a heatshrink sleeve.
Quick and easy-to-use: simply place the terminal and the wire together and heat them using a hot air gun.
The clear sleeve facilitates connection quality control.
These terminals are available with (W1) or without pre-installed earth wire. The 22 AWG multistrand wire is white.

//media.rs-online.com/t_line/LF180828-10.gif
Specificaties
Kenmerk Waarde
Minimum Cable Diameter 1.3mm
Maximum Cable Diameter 2.7mm
Sleeve Length 42mm
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Colour Transparent
750 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
1,837
(excl. BTW)
2,223
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 140
1,837 €
18,37 €
150 - 490
1,743 €
17,43 €
500 +
1,653 €
16,53 €
*prijsindicatie
Related Products
Commercial Shield Termination with 22 AWG Preinstalled Lead. ...
Description:
Commercial Shield Termination with 22 AWG Preinstalled Lead. Heat Shrinkable radiation cross linked modifoed polyolefin materialThermally stabilized thermoplastic meltable sealing ringDesignd for termination of a bare or tin plated copper shield.
Solder sleeve shield connectors provide a fast, reliable ...
Description:
Solder sleeve shield connectors provide a fast, reliable method of grounding leads to cable shields. The solder sleeve assembly contains a precisely engineered preform of flux solder inside a transparent heatshrinkable insulation sleeve with sealing rings. This provides environmentally sealed ...
The Solder Sleeve introduction kit contains various solder ...
Description:
The Solder Sleeve introduction kit contains various solder sleeves suitable for terminating a wide range of cable and wire constructions from 0.9mm to 15.1mm. Solder Sleeves provide insulated, environmentally sealed; strain-relieved soldered connectionsTemperature range -55°C to +125°CTerminate bare or tin ...
Transparent Insulation SleeveProvides Encapsulation, Inspectability, Strain Relief and ...
Description:
Transparent Insulation SleeveProvides Encapsulation, Inspectability, Strain Relief and InsulationHeat shrinkable, radiation cross linked modified polyolefinThermally stabilized thermoplasticApplications: Designed to splice tin plated or bare copper stranded wires.