TE Connectivity Natural Solder Sleeve 4.06 → 7.62mm

Datasheets
Wetgeving en conformiteit
Niet conform
Productomschrijving

D-142 Terminals

D-142 compact terminals allow earth tags to be created on screened cables and are compatible with many dielectric and insulating materials, even those that are heat-sensitive.
The solder connections are insulated, protected and highly resistant to mechanical stress.

Features and Benefits

• Easy-to-use, simply place the terminal and the wire together and heat them using a hot air gun.
• Clear sleeve facilitates connection quality control

Approvals

NAS-1745 (aeronautics) and MIL-STD-105 (military) approved, except D-142-65.

Specificaties
Kenmerk Waarde
Minimum Cable Diameter 4.06mm
Maximum Cable Diameter 7.62mm
Sleeve Length 19.05mm
Material PVDF
Dielectric Strength 1kV
Minimum Operating Temperature -55°C
Colour Natural
60 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2640 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
2,478
(excl. BTW)
2,998
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 140
2,478 €
24,78 €
150 - 490
2,354 €
23,54 €
500 +
2,232 €
22,32 €
*prijsindicatie
Related Products
These sealed sleeves enable several wires to be ...
Description:
These sealed sleeves enable several wires to be soldered together, for applications where a high degree of reliability is essential.Recommended for locations that would be difficult to access later.They feature a heat-fusion adhesive insert to ensure the splice is sealed.Easy ...
Solder sleeve shield connectors provide a fast, reliable ...
Description:
Solder sleeve shield connectors provide a fast, reliable method of grounding leads to cable shields. The solder sleeve assembly contains a precisely engineered preform of flux solder inside a transparent heatshrinkable insulation sleeve with sealing rings. This provides environmentally sealed ...
The Solder Sleeve introduction kit contains various solder ...
Description:
The Solder Sleeve introduction kit contains various solder sleeves suitable for terminating a wide range of cable and wire constructions from 0.9mm to 15.1mm. Solder Sleeves provide insulated, environmentally sealed; strain-relieved soldered connectionsTemperature range -55°C to +125°CTerminate bare or tin ...
Each terminator consists of heatshrinkable sleeve containing prefluxed ...
Description:
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated ...