TE Connectivity Transparent Solder Sleeve 0.4 → 1.7mm

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: MX
Productomschrijving

CWT 38 braided cable terminals

These terminals allow earth tags to be created on shielded cables.
Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.
The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a fluxed solder ring and a heatshrink sleeve.
Quick and easy-to-use: simply place the terminal and the wire together and heat them using a hot air gun.
The clear sleeve facilitates connection quality control.
These terminals are available with (W1) or without pre-installed earth wire. The 22 AWG multistrand wire is white.

//media.rs-online.com/t_line/LF180828-10.gif
Specificaties
Kenmerk Waarde
Minimum Cable Diameter 0.4mm
Maximum Cable Diameter 1.7mm
Sleeve Length 26mm
Material Polyolefin
Dielectric Strength 2kV
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Colour Transparent
Shrink Temperature +85°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 27/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 10)
0,748
(excl. BTW)
0,905
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 140
0,748 €
7,48 €
150 - 490
0,71 €
7,10 €
500 +
0,675 €
6,75 €
*prijsindicatie
Related Products
A one piece soldering system for jointing signal ...
Description:
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed ...
Solder sleeve shield connectors provide a fast, reliable ...
Description:
Solder sleeve shield connectors provide a fast, reliable method of grounding leads to cable shields. The solder sleeve assembly contains a precisely engineered preform of flux solder inside a transparent heatshrinkable insulation sleeve with sealing rings. This provides environmentally sealed ...
The Solder Sleeve introduction kit contains various solder ...
Description:
The Solder Sleeve introduction kit contains various solder sleeves suitable for terminating a wide range of cable and wire constructions from 0.9mm to 15.1mm. Solder Sleeves provide insulated, environmentally sealed; strain-relieved soldered connectionsTemperature range -55°C to +125°CTerminate bare or tin ...
Transparent Insulation SleeveProvides Encapsulation, Inspectability, Strain Relief and ...
Description:
Transparent Insulation SleeveProvides Encapsulation, Inspectability, Strain Relief and InsulationHeat shrinkable, radiation cross linked modified polyolefinThermally stabilized thermoplasticApplications: Designed to splice tin plated or bare copper stranded wires.