ADAFRUIT INDUSTRIES 1525 Solar Charger, Output:6 V @ 930 mA

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Adafruit 5.6W 6V Solar Panel

This 5.6 Watt solar panel is waterproof, scratch resistant, and UV resistant. Built using an aluminium/plastic composite substrate, they are both strong and lightweight and can easily stand up to typical outdoor use. 4 plastic mounting screws provide an easy way to keep your panel secured.

Length: 220 mm / 8.7"
Width: 175 mm / 6.9"
Cell type: Monocrystaline
Cell efficiency: 17%+
Thickness (without screws): 5 mm / 0.2"
Thickness (with screws): 10 mm / 0.4"
Wire Length: 260 mm / 10.2"
Connector Size: outside diameter (OD) 3.5 mm and inside diameter (ID) 1.1 mm
Weight: 225 g

Solar Panels and Chargers

Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries.
Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity.

How Much power?

The daily power production of a solar panel can be calculated by multiplying the panel’s peak power rating by between 0.5 and 6 depending on the time of year, angle and location. For example; an 80Watt solar panel produces a peak current of 4.55A.

Solar Installation

Solar panels are usually installed at a 55-65° angle for optimal wintertime performance. For a year round power supply solar panels can be combined with Wind chargers.
Solar panels can be connected in parallel to increase power and in series to increase voltage.
To complete the system deep cycle batteries, a voltage regulator and electrical cables are required to get up and running. A range of convenient mounting kits are available for pole or wall mounting.

Specificaties
Kenmerk Waarde
Model Number 1525
Power Rating 5.6W
Output Voltage 6 V @ 930 mA
Dimensions 220 x 175 x 10mm
Weight 225g
28 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
62,58
(excl. BTW)
75,72
(incl. BTW)
Aantal stuks
Per stuk
1 +
62,58 €
Related Products
Intelligent traveller fast charger with Zero Watt Technology. ...
Description:
Intelligent traveller fast charger with Zero Watt Technology. Charges 1- 4 AA or AAA cellsWide Range 100-240Vac Input for worldwide useSupplied with 2 interchangeable input plugs (UK, EU)Supplied with 12Vdc car adaptor for mobile use Individual monitoring of each cell ...
Fast, programmable Ni/Cd and Ni/MH battery charger.Automatic detection ...
Description:
Fast, programmable Ni/Cd and Ni/MH battery charger.Automatic detection of completed charge. Protected against current overloads and polarity reversal.Includes EU, UK, US & AUS input plugs plus 2.1mm & 2.5mm output plugsApproved for medical devices: EN 60601.
The Ansmann AC24 Traveller plug-in charger for NiCd/NiMH ...
Description:
The Ansmann AC24 Traveller plug-in charger for NiCd/NiMH battery packs with 2-4 cells (2.4 - 4.8V). Lightweight switch mode design200mA charge currentChangeable plug heads for use in Europe and UKMultiple output plugsChangeable output polarityLED charge status indicatorShort circuit and reverse ...
The Ansmann AC48 Traveller plug-in charger for NiCd/NiMH ...
Description:
The Ansmann AC48 Traveller plug-in charger for NiCd/NiMH battery packs with 4-8 cells (4.8-9.6V). Lightweight switch mode designCharge current 350mA (4 Cells) to 150mA (8 Cells)Changeable plug heads for use in Europe and UKMultiple output plugsChangeable output polarityLED charge status ...