- RS-stocknr.:
- 418-546
- Fabrikantnummer:
- TCP100
- Fabrikant:
- Eaton
- RS-stocknr.:
- 418-546
- Fabrikantnummer:
- TCP100
- Fabrikant:
- Eaton
Wetgeving en conformiteit
N.v.t.
Productomschrijving
Eaton Bussmann Series Red Spot™ Range, Type 'T' HBC Fuses
The Red Spot range of offset slotted fuses (or bolted tag fuses) from Eaton Bussmann is specifically designed for the protection of general industrial applications such as power distribution, cable protection and motor protection. Available in BS88 British Standard fuse sizes from A1 to A4, offset slotted and bolted fuses are suitable for general purpose rating (gG) and dual motor rating (gM) motor protection types.
Features and Benefits
2 to 200 A rated current
Breaking capacity 80 kA up to 690 V ac
Type A1 rated up to 550 V ac/ 250 V dc
Type A2 rated up to 660 V ac / 460 V dc
General purpose (gG) and dual motor rated (gM) types
Low power dissipation
ASTA 20 certified
Breaking capacity 80 kA up to 690 V ac
Type A1 rated up to 550 V ac/ 250 V dc
Type A2 rated up to 660 V ac / 460 V dc
General purpose (gG) and dual motor rated (gM) types
Low power dissipation
ASTA 20 certified
As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A.
Eaton British Standard Fuse, A4 Size, 100A TCP100
This Eaton British Standard fuse protects your electrical equipment and motors from short circuits and current overloads. The bolted metal tags on either end of the cylindrical body fasten to a circuit and conduct power through the fuse. If the current continuously exceeds the maximum capacity then the metal strip inside the fuse melts and the circuit is physically broken. This is a reliable, material-based way to break your circuit without having to rely on a digital circuit breaker. General-purpose (gG) and dual motor rating (gM) motor-protection devices commonly use this type of fuse.
Features & Benefits
100A (amperes) maximum current capacity for dependable use with large low-voltage currents
80kA (kiloamperes) breaking capacity ensures breaking the current is safe and wont destroy your equipment or cause fire or shock hazards
Low power dissipation ensures circuit power is maintained through the fuse
80kA (kiloamperes) breaking capacity ensures breaking the current is safe and wont destroy your equipment or cause fire or shock hazards
Low power dissipation ensures circuit power is maintained through the fuse
How fast will the fuse stop the current after overload?
The T-speed fuse has a slow-burning speed, so it allows for some over-voltage but breaks when the level becomes critical. It has a high-rupturing capacity (HRC), which ensures the circuit is not just going through a momentary spike or needs to be turned off, helping to avoid unnecessary current interruptions.
Note
Eaton formerly known as Bussmann
Specificaties
Kenmerk | Waarde |
---|---|
Current Rating | 100A |
Fuse Size | A4 |
Voltage Rating | 660V ac |
Fuse Standard | BS 88-2:1988, IEC 60269-2 |
Fixing Centres | 93.7mm |
Application Category | gG, gM |
Tag Width | 19.1mm |
Fuse Speed | T |
High Rupture Capacity | Yes |
Overall Length | 111mm |
Body Diameter | 26mm |
Tag Type | Slotted |
Tag Orientation | Offset |
Body Height | 58mm |
Series | Bussmann |