Surface Mount Slide Switch Single Pole Double Throw (SPDT) 200mA Slide

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Copal Electronics CL-SB-12A-11 is a SPDT 2-position slide switch having DC current rating of 2000mA. The contact material is Copper whereas the contact finish is Gold. Its polyamide (PA),nylon actuator is 2mm in length. It has a wide variety like circuit composition, operating direction, terminal shape J-hook, Gull wing, through hole pins. CL-SB-12A-11 SPDT slide switch adopted twin-contact mechanism. These switches are ROHS compliant. CL-SB-12A-12 SPDT slide switches consists of 500 pieces per reel which weighs 5 grams.

On-On switch function with 10,000 electrical life cycles with an operating force of 153gf
Standardization of the silver as well as gold contacts
Uses a heat-resistant resin to support reflow soldering mounting
The minimum insulation resistance is 100MΩ and maximum contact resistance is 50mΩ
Switch Travel Time is 200mm

Specificaties
Kenmerk Waarde
Contact Configuration Single Pole Double Throw (SPDT)
Mounting Type Surface Mount
Contact Current Rating 200mA
Terminal Type J-Hook
Actuator Type Slide
Length 8.5mm
Width 5.5mm
Depth 4.3mm
Dimensions 8.5mm x 5.5mm x 4.3mm
Contact Resistance 50mΩ
Mechanical Life 10000Operations
Voltage Rating 12V
Operating Temperature Range -40 → +85°C
Contact Material Silver
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Actuator Material Polyamide
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each (In a Pack of 10)
0,733
(excl. BTW)
0,887
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 10
0,733 €
7,33 €
20 - 20
0,697 €
6,97 €
30 - 30
0,662 €
6,62 €
40 - 40
0,629 €
6,29 €
50 +
0,597 €
5,97 €
*prijsindicatie
Related Products
The NKK ultra miniature slide switches have an ...
Description:
The NKK ultra miniature slide switches have an award winning STC mechanism. These slides can have molded terminals lock out flux, and other contaminants inserted. Top or side actuationCompact dimensionsLow profile, high density mounting and stacking of PC boardsPrecise actuationDouble ...
The C&K slide switch is a surface mount ...
Description:
The C&K slide switch is a surface mount double pole ON-ON-ON (DP3T) switch. It is a mechanical slider used to control current flow in a circuit. This is a latching switch with 300mA current rating and 13mm length. • 3.5mm ...
Compatible with most automatic pick & place machineryCompact ...
Description:
Compatible with most automatic pick & place machineryCompact and space saving SMD typeExcellent Contact stability by twin Gold-Plated ContactLow profile Design of 2.5 mm.
2-position snap-in panel mountAvailable with a black lever(stock ...
Description:
2-position snap-in panel mountAvailable with a black lever(stock no 249-3000 & 249-3016) or red lever (stock no. 249-3038)Stock nos 249-3016 & 249-3038 have ON OFF housing markingsNo of operations; 10000 under full load min.Silver contactsGlass Filled Acetal actuator and Nylon ...