Phoenix Contact PSI-MOS-DNET CAN/FO 850/BM, Fiber Optic Converter, , 0.46 A, 42 V ac, 60 V dc Output

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Fibre Optic Converters

Industrial modules that enable conversion of RS232, RS422, RS485, CAN, CANopen and deviceNET communication supports to an 850 Nm Fibre Optic connection.
A diagnostic system monitors the fibre optic section. This allows the line status to be signalled via LEDs placed on the front and via an output switch, which is activated when the connection is critical.
Fibre optic connection with B-FOC(ST®) or FSMA and MINICONEC screw terminal for the copper part and D-sub 9 for the PROFIBUS version.
Operating temperature: -20 °C → 60 °C
DIN rail assembly.

Specificaties
Kenmerk Waarde
Output Range 0.46 A, 42 V ac, 60 V dc
Supply Voltage 10 → 30 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Series PSI-MOS-DNET CAN/FO 850/BM
Operating Temperature Range -20 → +60 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26/08/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
421,74
(excl. BTW)
510,31
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
421,74 €
5 +
410,03 €
Related Products
The PSM-EG- switchgear modules are designed for industrial ...
Description:
The PSM-EG- switchgear modules are designed for industrial use and offer the following features:. Bi-directional conversion from RS-232 (V.24) to RS-232 (v.24), RS-422 (V11) and RS-485High quality galvanic isolation with 2.5kV test voltagePower supply voltage 24Vdc ±20%Alternative data line connection ...
From Phoneix Contacts, the DIN-Rail mounted PSM-ME-RS232/RS232-P Interface ...
Description:
From Phoneix Contacts, the DIN-Rail mounted PSM-ME-RS232/RS232-P Interface converter is used for electrical isolation of RS-232 interfaces. The robust four-channel converter is a category 3 device designed for installation in zone 2 potentially explosive areas. It meets the requirements of ...
Input options, 0-24VDC, 0-30VDCOutput options, 0-20mA, 4-20mA, 0-10V, ...
Description:
Input options, 0-24VDC, 0-30VDCOutput options, 0-20mA, 4-20mA, 0-10V, 2-10V, 0-5V, 1-5VConfigured using dip switches3-way isolated24 VDC powered on module or via DIN rail bus connector6.2mm wideScrew terminals.
Inputs, 0-20mA, 4-20mA, 1-10mA, 2-10mA, 0-10V, 1-5V, 0-5V, ...
Description:
Inputs, 0-20mA, 4-20mA, 1-10mA, 2-10mA, 0-10V, 1-5V, 0-5V, 2-10VOutputs, 8 frequency bands and 8 PWM standards3-way isolated24VDC powered on module or via DIN rail bus connector6.2mm wideScrew terminals.