Phoenix Contact MINI MCR-SL-U-U-SP, Isolation Galvanic Isolator, Voltage 0 → 10 V, -10 → 10 V Input

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: DE
Productomschrijving

3-Way Isolation Amplifier

From Phoneix Contacts, the DIN-Rail mounted MCR-C 3-way signal conditioners are used for electrical isolation and conversion of analogue signals. Three-way electrical isolation ensures reliable decoupling of the sensor circuit from the processing circuit, thus also preventing several distributed measurement circuits from influencing one another.

Method of Operation

The analogue signal is modulated before being electrically isolated by means of a transmitter. The electrically isolated signal is then demodulated, filtered, amplified and made available at the output.

Features and Benefits

• DIN Rail Mounting
• Processing of standard signals
• 3-way isolation
• Fixed setting of input and output signals

Specificaties
Kenmerk Waarde
Input Range -10 → 10 V, 0 → 10 V
Output Range -10 → 10 V, 0 → 10 V
Supply Voltage 24 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +65°C
Operating Temperature Range -20 → +65 °C
Series MINI MCR-SL-U-U-SP
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
139,33
(excl. BTW)
168,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
139,33 €
Related Products
Opto 2 click is a galvanic isolator Click ...
Description:
Opto 2 click is a galvanic isolator Click board™, used to provide an optical isolation of sensitive microcontroller (MCU) pins, when operated by external signals. TLP2770 opto-isolation elements (optocouplers) can be driven with a very low current, down to 1.3mA ...
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, ...
Description:
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, amplify, filter and electrically isolate standard analogue signals. Clipping capability provides analogue signal limitation to output end values Calibrated scale switching PC configuration interface Safe 3 way isolation with 4 kV test ...
MTL1211 is a 1 channel switch or proximity ...
Description:
MTL1211 is a 1 channel switch or proximity detector isolator that has the ability to select line fault detection or repeat output. The signal conditioner is DIN Rail mountable. 1 Channel switch/proximity detector with line fault detectionSwitches are used to ...
Input options, 0-24VDC, 0-30VDCOutput options, 0-20mA, 4-20mA, 0-10V, ...
Description:
Input options, 0-24VDC, 0-30VDCOutput options, 0-20mA, 4-20mA, 0-10V, 2-10V, 0-5V, 1-5VConfigured using dip switches3-way isolated24 VDC powered on module or via DIN rail bus connector6.2mm wideScrew terminals.