RS PRO Signal Conditioner, Current Input, Relay Output, 10 → 30V dc Supply
- RS-stocknr.:
- 218-4447
- Fabrikant:
- RS PRO
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30/04/2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 225,87
(excl. BTW)
€ 273,30
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 225,87 |
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 218-4447
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
RS PRO Amplifier, Analogue Input
This RS PRO trip amplifier converts analogue input signals into a digital output. The screw terminals are symmetrical so you can mount the unit to a DIN rail. They're also embedded to protect your fingers during installation, increasing safety and preventing workplace injury.
This amplifier features a light-emitting diode (LED) indicator that clearly shows whether the power is on or off, even in dark workspaces. The slim design makes it easier to find room to install the amplifier, even in cramped electronic set-ups.
As part of our RS PRO range, this product has been tested by engineers to ensure its quality and reliability. You'll often find amplifiers like this used in process control and instrumentation applications.
This amplifier features a light-emitting diode (LED) indicator that clearly shows whether the power is on or off, even in dark workspaces. The slim design makes it easier to find room to install the amplifier, even in cramped electronic set-ups.
As part of our RS PRO range, this product has been tested by engineers to ensure its quality and reliability. You'll often find amplifiers like this used in process control and instrumentation applications.
Features and Benefits
• Input range of 4 to 20 mA
• Analogue input type
• Operating temperature range of 0°C to +50°C
• Amplifier module type
• DIN rail mounting type
• Relay output type
• RTD, thermocouple sensor compatibility
• 910 Series
• Analogue to digital relay signal conditioner type
• Supply voltage of 10 to 30 V DC
• Screw termination
• Analogue input type
• Operating temperature range of 0°C to +50°C
• Amplifier module type
• DIN rail mounting type
• Relay output type
• RTD, thermocouple sensor compatibility
• 910 Series
• Analogue to digital relay signal conditioner type
• Supply voltage of 10 to 30 V DC
• Screw termination
Specificaties
Kenmerk | Waarde |
|---|---|
| Module Type | Trip Amplifier |
| Input Signal Type | Current |
| Output Signal Type | Relay |
| Input Range | 4 → 20mA |
| Supply Voltage | 10 → 30V dc |
| Mounting Type | DIN Rail Mount |
| Operating Temperature Range | 0 → +50°C |
| Series | 9100 |
| Termination | Screw |
| Maximum Operating Temperature | +50°C |
| Minimum Operating Temperature | 0°C |