Murrelektronik Limited DC Voltage to Voltage Signal Conditioner, Voltage 12.4 V dc, 24 V dc Input

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CZ
Productomschrijving

Murrelektronik MIRO 12.4 Signal Conditioner

MurrElektronik MIRO 12.4 series signal conditioner modules are designed to connect a potentiometer, 3-wire sensors or mechanical switches. The modules output voltage can be set from 0 V to 10 V, independently of the measuring range of the input used.

Features and Benefits

Status LED Screw terminals
35mm DIN Rail mounting

Murrelektronik Signal Conditioners

Specificaties
Kenmerk Waarde
Input Range 12.4 V dc, 24 V dc
Output Range 0 → 10 V dc
Supply Voltage 20 → 30 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -25°C
Maximum Operating Temperature +50°C
Standards Met EN 60715
Operating Temperature Range -25 → +50 °C
Number of Channels 1
Termination Screw
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
110,74
(excl. BTW)
134,00
(incl. BTW)
Aantal stuks
Per stuk
1 +
110,74 €
Related Products
Siemens Sirius 3RS70 signal converters perform the coupling ...
Description:
Siemens Sirius 3RS70 signal converters perform the coupling function for analogue signals on both the input side and the output side. They are indispensable when processing analogue values with electronic controls. Under harsh industrial conditions in particular, it is often ...
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, ...
Description:
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, amplify, filter and electrically isolate standard analogue signals. Clipping capability provides analogue signal limitation to output end values Calibrated scale switching PC configuration interface Safe 3 way isolation with 4 kV test ...
The MTLx525 enables an on/off device in a ...
Description:
The MTLx525 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as solenoids, alarms, LEDs and other low power devices that are ...
Switch selectable input signal rangesOutput selectable by terminalsOffset ...
Description:
Switch selectable input signal rangesOutput selectable by terminalsOffset and gain adjustable ±5%LED indication below 5% inputGalvanic isolation input to output to supplyNPN – PNP output device; 30Vdc max.