Pepperl + Fuchs SC-System, Rotation Speed Monitor Signal Conditioner, Digital, 2 mA, 24 V dc Output

Datasheets
Wetgeving en conformiteit
Vrijgesteld
Land van herkomst: DE
Productomschrijving

Pepperl+Fuchs SC-System Signal Conditioners

Pepperl + Fuchs SC-System signal conditioners are especially designed for general purpose applications and ensure reliable process communication. High-quality isolation, an extended temperature range, and an extremely compact housing design characterise the signal conditioner range. The SC-System offers powerful modules for analogue and digital measuring signals – from the isolating amplifier to the highly functional temperature converter to switch amplifier. Matching accessories enable easy and fast power supply, installation and, configuration of signal conditioners.
The SC-System combines the most powerful features of comparable devices in one product family.

Features and Benefits

Quick and easy mounting Reduced wiring effort due to Power Bus
Minimal space requirements due to 6 mm module width and 97 mm height
Extended temperature range from -25°C to 70°C
High-quality galvanic isolation with 300 V operating- / 3 kV test voltage
Optimised housing design for easy handling

Pepperl+Fuchs Signal Conditioners

Specificaties
Kenmerk Waarde
Input Range <3 (Function Input) V, 0.15 → 2 (S0 Sensor) mA, 1.2 → 2.1 (Mechanical Contact) mA, 1.2 → 2.1 (NAMUR Sensor ) mA, 1.2 → 2.1 (SN Sensor) mA, 3 → 5 (NPN Sensor) V, 4 → 6 (2-Wire DC Sensor) V, 8 → 10 (Mechanical Contact) V, 8 → 10 (PNP Sensor) V, 150 → 400 (AC Source) mV
Output Range 2 mA, 24 V dc
Supply Voltage 16.8 → 31.2 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
Operating Temperature Range -25 → +70 °C
Series SC-System
Termination Screw
Standards Met CE, EN 61010-1:2010, EN 61326-1:2013, IEC 60529:2001
Number of Channels 1
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17/08/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
178,00
(excl. BTW)
215,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
178,00 €
Related Products
The MTLx525 enables an on/off device in a ...
Description:
The MTLx525 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as solenoids, alarms, LEDs and other low power devices that are ...
3-way signal conditioner, with configurable input/output, for electrical ...
Description:
3-way signal conditioner, with configurable input/output, for electrical isolation and conversion of Analogue signals in the mV and V range, unipolar as well as bipolar. Push-in connection technology, standard configuration.Voltage signal 3-way signal conditioner with pluggable connection technology for the ...
GEN1600T/Signal Conditioner for RTD, Thermocouple and Potentiometer sensors. ...
Description:
GEN1600T/Signal Conditioner for RTD, Thermocouple and Potentiometer sensors. Other sensor characteristics can be downloaded into the product for your special needs from USB Speed-Link 3.4.1.0 http://www.status.co.uk/software.html Output stage offers voltage, bipolar voltage or current re-transmission ...
These series G3PW are compact 1-phase power controllers, ...
Description:
These series G3PW are compact 1-phase power controllers, and it’s possible for side-by-side mounting for multiple units.Process value can be easily monitored via the 7-segment display on the front panel. Power controller for panel- or wallmountingOutput modes for phase control: ...