Murata Power Solutions Brass-Ended Shunt, 100 A, 100mV Output, ±0.25 % Accuracy

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CA
Productomschrijving

Murata Power Solutions DC Shunt

The Murata Power Solutions DC shunt has an output voltage rating of 100mV at 100A. This precision shunt connects directly to the MPS DCA5-20PC series of DC ammeters. Its installation is straightforward simply connect the load circuit to the shunt’s threaded studs and the shunt’s mV Kelvin-outputs to the digital ammeter’s input terminals. It features a rugged phenolic base that provides 750V isolation to the shunt’s brass terminals, allowing direct attachment to metal surfaces.

Features and Benefits

High precision with ±0.25% accuracy
Resistance is 0.00025ohm
Manganin sensing element
Base mount
Operating temperature ranges between -40°C and 60°C

Applications

Embedded designing
Research and development

Specificaties
Kenmerk Waarde
Maximum Current 100 A
Voltage Output 100mV
Shunt Type Brass-Ended
Accuracy ±0.25 %
Minimum Temperature -40°C
Maximum Temperature 60°C
11 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
26,93
(excl. BTW)
32,59
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
26,93 €
5 - 9
26,13 €
10 +
25,05 €
Related Products
The 5600 series of current sense transformers are ...
Description:
The 5600 series of current sense transformers are designed to monitor AC currentsThe transformers can be used for high frequency current sensingSuitable for switched-mode power supplies, motor control, and electronic lighting ballastsAvailable with cable hole primary and single or centre ...
Panel/PCB mountingEpoxy encapsulated 12-pin DIPSplash proofOptional bezel with ...
Description:
Panel/PCB mountingEpoxy encapsulated 12-pin DIPSplash proofOptional bezel with gasket availableAuto-polarity’Display Enable’ function permits power-down modeOver-range indicationDimensions: H22.4 x W35.1 x D18.47mmPanel cut-out: 34 x 22 mmDepth behind panel: 17.45 mm.
Description:
All meters have an accuracy of ±0.1% ( ± 1 count). Auto zero, auto polarityExcess voltage protection: ± 250V maximumNo external components, ideal for portable instrumentationBezel availableFitted without screws, panel or PCB23.5 x 55 x 20mm (H/W/D)Panel cut-out 53.8 x ...
Self-powered; two connections requiredIdeal replacement for analogue panel ...
Description:
Self-powered; two connections requiredIdeal replacement for analogue panel meterReverse polarity protectedRugged ABS caseLow power consumption.