RF Solutions, KAPPA Modem Shield

  • RS-stocknr. 903-3046
  • Fabrikantnummer KAPPAM-ARD
  • Fabrikant RF Solutions
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

KAPPA Modem Module Shield for Arduino

The KAPPAM-ARD Module Shield serves as an interface between an Arduino processor board and the supplied KAPPA-M868 radio modem module.

KAPPA-M868 module
RF Carrier Frequency: 868.4 to 869.8MHz ISM Band with 5 channels
RF Power Output: +13dBm
Receiver Sensitivity: -121dBm @ 9600bps
Range: up to 1000m (line of sight)
Host communication: serial UART with CTS/RTS flow control

Note

The KAPPA-M868 module is also available separately under RS Part No. 111-0159.

Supplied with

KAPPA-M868 radio modem SIL module

Wireless Modules - RF Solutions

Specificaties
Kenmerk Waarde
Product Name KAPPA Modem Shield
Kit Classification Shield
Processor Part Number KAPPAM-ARD
For Use With Arduino
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
38,99
(excl. BTW)
47,18
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
38,99 €
5 - 9
37,43 €
10 - 24
35,48 €
25 - 49
33,14 €
50 +
30,80 €
Related Products
Two eRIC Arduino Shields which allow wireless communication ...
Description:
Two eRIC Arduino Shields which allow wireless communication between Arduino™ boards using proprietary LPRS easyRadio technology. This technology provides considerably greater range and lower power consumption than similar Wi-Fi or Bluetooth devices operating in the overcrowded 2.4GHz bands. An on-board ...
The MEAS weather shield for ARDUINO/Genuino mother board ...
Description:
The MEAS weather shield for ARDUINO/Genuino mother board provides the necessary hardware to interface the HTU21D digital relative humidity sensor, MS5637 digital barometric pressure sensor, temperature system sensor (TSYS01), MS8607 digital relative humidity and digital pressure sensor, TSD305-1C55 digital ...
The 12V Protected switch shield for Arduino comes ...
Description:
The 12V Protected switch shield for Arduino comes with BTS50015-1TAD (RDS(ON) 1.5mΩ), an ultra-low ohmic smart high-side power switch from the Power PROFET™ family. Designed for relay and fuse replacement in power distribution and junction boxes, Power PROFET™ can drive ...
The Arduino ProtoShield is an innovative tool that ...
Description:
The Arduino ProtoShield is an innovative tool that makes designing custom circuits easy. You can easily solder TH or SMD ICs on the prototyping area to test them with your Arduino board. The SMD area is designed for a maximum ...