SparqEE, ShieldAv1-0

  • RS-stocknr. 811-0723
  • Fabrikantnummer ShieldAv1-0
  • Fabrikant SparqEE
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

SparqEE Arduino Adapter Shield

The ShieldAv1.0 is a shield or adapter that connects the SparqEE CELLv1.0 to an Arduino processor board without any additional wiring. In addition, breakouts are provided for the four additional SparqEE boards (ACCELv1.0 (811-0720), GPSv1.0 (811-0732), POWERv1.0 (811-0726), RELAYv1.0 (811-0739)) if the user prefers to directly connect any of those boards to the shield

LEDs for CELLv1.0 status lin
Dimensions: 55 x 70mm
Weight: 0.70oz
Operating temperature range: -40 to +85°C

Note

Please visit the following websites for further information:

SparqEE: http://sparqee.com/
Arduino Shield: http://www.sparqee.com/products/sparqee-shielda
Forum: http://www.forum.sparqee.com/
Code/Drivers: http://www.sparqee.com/code-cell/

Specificaties
Kenmerk Waarde
Product Name ShieldAv1-0
Kit Classification Shield
Processor Part Number ShieldAv1-0
For Use With Arduino
79 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
7,51
(excl. BTW)
9,09
(incl. BTW)
Aantal stuks
Per stuk
1 +
7,51 €
Related Products
The 12V Protected switch shield for Arduino comes ...
Description:
The 12V Protected switch shield for Arduino comes with BTS50015-1TAD (RDS(ON) 1.5mΩ), an ultra-low ohmic smart high-side power switch from the Power PROFET™ family. Designed for relay and fuse replacement in power distribution and junction boxes, Power PROFET™ can drive ...
Low power consumptionWide area coverageAT command to controlAuto ...
Description:
Low power consumptionWide area coverageAT command to controlAuto support 3.3v or 5v Arduino boardCompatible with Arduino Leonardo, Uno, Mega2560, DUE… etApplications:Smart metering (electricity, gas and water)Facility management servicesIntruder and fire alarms for homes & commercial propertiesConnected personal ...
Featured with RN171 TCP/IP module, the WiFi shield ...
Description:
Featured with RN171 TCP/IP module, the WiFi shield allows your Arduino/Seeeduino to connect wireless networks up to 802.11b/g. The RN171 module supports TCP, UDP, FTP and HTTP communication protocols, which meet the needs of most wireless and Internet of Things ...
The RF Digital RFD22125 Proto shield allows you ...
Description:
The RF Digital RFD22125 Proto shield allows you to build your own prototype shield for the RFduino. There is a free grid area to enable you to add your own circuits; it also lets you access the 3V supply rail ...