- RS-stocknr.:
- 174-6730
- Fabrikantnummer:
- MCL-10-F
- Fabrikant:
- Ruland
16 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 5,85
(excl. BTW)
€ 7,08
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 5,85 |
5 - 9 | € 5,62 |
10 - 24 | € 5,49 |
25 + | € 5,39 |
- RS-stocknr.:
- 174-6730
- Fabrikantnummer:
- MCL-10-F
- Fabrikant:
- Ruland
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- US
Productomschrijving
Ruland MCL-10-F is a one-piece shaft collar with a 10mm bore, 24mm OD, and 9mm width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MCL-10-F is stamped with the Ruland name and bore size for ease of identification.
Specificaties
Kenmerk | Waarde |
---|---|
Shaft Diameter | 10mm |
One/Two Piece | One Piece |
Material | Carbon Steel |
Single/Double Wide | Single |
Outside Diameter | 24mm |
Fastening | Clamp Screw |
Width | 9mm |
Finish | Black Oxide |