ZF Angular Position Sensor Magnet, 57.33 x 48.3 x 17.7 mm

  • RS-stocknr. 765-9353
  • Fabrikantnummer CU103602
  • Fabrikant ZF
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

AN8 Series Angular Position Sensors

The AN8 series of angular position sensors from Cherry are operated by a magnetic actuator near to the face of the sensor. These programmable magnetic position sensors are suitable for various applications including the replacement for smart bearings, pedal position sensors and throttle position sensors.

High tolerance for misalignment
Sensing up to 360 °
5 Vdc ratiometric device
No mechanical interface so no parts to wear out
Operating temperature range -40 → +125 °C

Specificaties
Kenmerk Waarde
Application Angular Position Sensor
Length 57.33mm
Width 48.3mm
Height 17.7mm
Dimensions 57.33 x 48.3 x 17.7 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 02/09/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
40,16
(excl. BTW)
48,59
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
40,16 €
6 - 11
38,96 €
12 +
37,34 €
Related Products
The AEAT-601B is a low-cost rotary quadrature encoder ...
Description:
The AEAT-601B is a low-cost rotary quadrature encoder that converts the rotation of a shaft to a series of pulses on 3 digital output channels. A suitable microcontroller can calculate angular position, speed and rotational direction from the two signals ...
GXM1W.A20W0BBB is a combination of two Baumer products: ...
Description:
GXM1W.A20W0BBB is a combination of two Baumer products: 1. GXP1W.A2041C1 - Parallel absolute encoder 2. Z 140.001 - Female 37-pin D-SUB connector. + A unique signal for each angular positionNo need for initialisation (zero reference) Immediately after power up or ...
Non-contact linear transducers for use in any application ...
Description:
Non-contact linear transducers for use in any application where linear position feedback is requiredCaptive or floating magnet optionsElectro Magnet option allows multi feedback positionsSimple clamp fixing and plug in connection100-1500mm stroke lengths0-10V or 4-20mA output optionsMagnets available separately.
Enable to detect ±10 μm level displacement, applicable ...
Description:
Enable to detect ±10 μm level displacement, applicable to detect duplicated paper feeding or deflection amount.Displacement output changes by object colours are stabilized with signal divider circuit.Operating area = 6.5 ±1 mm.