BALLUFF Rectangular Micropulse Transducer Magnet, 28 x 40 x 29.9 mm

  • RS-stocknr. 355-5519
  • Fabrikantnummer BTL5-F-2814-1S
  • Fabrikant BALLUFF
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Analogue Ouput Linear Transducers

Non-contact linear transducers for use in any application where linear position feedback is required
Captive or floating magnet options
Electro Magnet option allows multi feedback positions
Simple clamp fixing and plug in connection
100-1500mm stroke lengths
0-10V or 4-20mA output options
Magnets available separately

Note

Electro Magnet requires an M16 four pin connector.

//media.rs-online.com/t_line/L355541-01.jpg
Specificaties
Kenmerk Waarde
Application Micropulse Transducer
Shape Rectangular
Length 28mm
Width 40mm
Height 29.9mm
Dimensions 28 x 40 x 29.9 mm
24 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
28 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
29,52
(excl. BTW)
35,72
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
29,52 €
5 - 9
28,31 €
10 +
27,39 €
Related Products
These magnets are designed to control Hall effect ...
Description:
These magnets are designed to control Hall effect sensors with on-off or analog operation.Easy to install with a 1/4-20 and 8-32 American thread nut (not supplied), for the model number.
Contact-free, bounce-free switchingImpervious to shocks and vibrationsContinuous short-circuit ...
Description:
Contact-free, bounce-free switchingImpervious to shocks and vibrationsContinuous short-circuit and overload proofHigh switching frequency → 5000 Hz3 m PUR connection cableTemperature range: -20 °C → +70 °CHigh IP67 protection rating.
The MP2018 series of sensors from Cherry are ...
Description:
The MP2018 series of sensors from Cherry are reed based magnetic position sensors in a plastic flange mount package. These switches can be approached by a magnet from any angle and with either pole. SPST-NO Form A10 W max. power ...
The EBR7912EBI-CA-KA incremental sensor module from Sensitec is ...
Description:
The EBR7912EBI-CA-KA incremental sensor module from Sensitec is designed for detecting the rotational position of a shaft utilising the MWR0032KAC-KH matching Ferrite magnet. Initially set up for 4096 pulses per revolution with the 32 pole magnet, the module is also ...