STMicroelectronics STEVAL-STLCS01V1, SensorTile Motion Sensor Data Capture Card

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

STEVAL-STLCS0xV1 SensorTile Wireless Sensor Board

The STEVAL-STLCS0xV1 SensorTile integrates movement sensing, barometric pressure sensing, an electronic compass, a MEMS microphone, STM32 MCU and a BlueNRG BLE network processor on a tiny PCB. It supports development of monitoring/tracking applications such as IoT standalone sensor nodes linked to iOS™ or Android™ smartphones.

Module Features

• 80MHz STM32L476JG Cortex M4F low-power MCU with 1MB Flash memory, 128KB RAM
• LSM6DSM iNEMO inertial module: 3D accelerometer and 3D gyroscope
• LSM303AGR eCompass module: 3D accelerometer and 3D magnetometer
• LPS22HB MEMS digital barometer: 260 to 1260hPa absolute pressure
• MP34DT04 MEMS digital microphone with 64dB SNR
• BlueNRG-MS Bluetooth 4.1 network processor
• BALF-NRG-01D3 50Ω balun with integrated harmonic filter
• Chip antenna
• LD39115J18R +1.8V @ 150mA LDO regulator
• SWD interface for firmware debugging/programming
• External interfaces: UART, SPI, SAI, I²C, DFSDM, USB OTG, ADC, GPIO
• Available with plug-in and/or solder host board connection
• Power supply: +2.0 to +5.5Vdc
• Dimensions: 13.5 x 13.5mm

RS Product Codes

143-8869 STEVAL-STLCS01V1 Solder/Plug connection
143-8870 STEVAL-STLCS02V1 Solder only connection 125-3924 STEVAL-STLKT01V1 SensorTile Evaluation Kit

Note

The module can be built into a production device, but will require screening and testing to prove compliance with regional RF emissions regulations.

Sensor Solution Evaluation Boards, STMicroelectronics

Specificaties
Kenmerk Waarde
Sensor Technology Motion Sensor
Kit Classification Data Capture Card
Kit Name SensorTile
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
15 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
31,44
(excl. BTW)
38,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
31,44 €
Related Products
The STEVAL-MKI180V1 adapter board is designed to facilitate ...
Description:
The STEVAL-MKI180V1 adapter board is designed to facilitate the evaluation of MEMS devices in the LIS3DHH product family. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application. The STEVAL-MKI180V1 can ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. Compass click features a compact high-performance e-compass module capable of measuring both linear acceleration and magnetic field strength. Applications include compensated compass, position ...
The Motion click mikroBUS™ add-on board features an ...
Description:
The Motion click mikroBUS™ add-on board features an infra-red motion detector and is perfect for all human detection designs such as alarm systems or light switch controllers.Features & Benefits of the Motion click•mikroBUS™ pinout standard•PIR500B pyroelectric motion sensor connected to ...
Serial I²C bus EEPROM Smartcard, equivalent to 24C02 ...
Description:
Serial I²C bus EEPROM Smartcard, equivalent to 24C02 Serial EEPROMManufacturer: STMicroelectronics with part number reference: ST14C02CMemory size: 2Kbits (256 Bytes of 8-bits)Blank smartcard without any software to create a prototypeI²C standard 2-wires serial interface programming onlyRead / Write mode: See ...