Seeed Studio 101020020, PIR Motion Sensor for Grove System

  • RS-stocknr. 174-3240
  • Fabrikantnummer 101020020
  • Fabrikant Seeed Studio
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Seeed Studio PIR Motion Sensor kit

The Seeed studio single-channel, grove passive infrared (PIR) motion sensor kit is designed to detect an infrared signal caused by motion. This kit has an integrated PIR sensor, motion detector and potentiometers. If the PIR sensor comes in contact with infrared energy, the motion detector is triggered and the sensor outputs HIGH on its SIG pin. The detecting range and response speed can be adjusted by two potentiometers soldered on its circuit board. Simply connecting it to Base Shield and programming it, it can be used as a suitable motion detector for Arduino projects

Features and Benefits

• Adjustable detecting distance and holding time
• Detecting angle is 120 degree
• Grove interface
• Input supply voltage ranges between 3V and 5V
• Maximum detecting range is 6m
• Response speed ranges between 0.3s and 25s

Applications

• Human Detection system
• Motion detector
• Motion sensor
• Security alarm system

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007
• ECCN 6A002. A.3. F
• UPC 841454107835

Specificaties
Kenmerk Waarde
For Use With Grove System
Kit Name PIR Motion Sensor
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
60 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
7,42
(excl. BTW)
8,98
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
7,42 €
5 - 9
6,97 €
10 - 24
6,55 €
25 +
6,16 €
Related Products
Its heart is a dual channel H-bridge driver ...
Description:
Its heart is a dual channel H-bridge driver chip that can handle current up to 2A per channel, controlled by an Atmel ATmega8L which handles the I2C communication with for example an Arduino. Both motors can be driven simultaneously while ...
The ON semiconductor PIR-GEVB passive infrared (PIR) evaluation ...
Description:
The ON semiconductor PIR-GEVB passive infrared (PIR) evaluation kit uses NCS36000 and is an innovative solution designed for low-cost passive infrared controlling applications. This kit is integrated with mixed-signal CMOS device, with the PCA9655E's 16-bits of General Purpose parallel Input ...
This temperature & humidity sensor provides a pre-calibrated ...
Description:
This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and the temperature is measured by a negative temperature coefficient (NTC) thermistor. It has excellent reliability and long term stability. This temperature ...
The Seeed studio single-channel, grove air quality sensor ...
Description:
The Seeed studio single-channel, grove air quality sensor v1.3 kit is for indoor air quality testing. This kit has an integrated senor Winsen MP503. It mainly detects gases such as carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic ...