RS PRO Nitrile Rubber SealV-Ring Seal, 40mm Bore, 53 → 58mm Outer Diameter

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

'V'-Ring Seals

The RS Pro V-Ring is an all-rubber seal designed for rotary shafts. Mounting directly onto the shaft, the elastic body holds itself firmly on the rotating shaft while the lip seals axially against the counter face, bearing race, bore housing or similar surfaces.

Features and Benefits

• Made from solid nitrile rubber • Can be stretched without requiring unit disassembly
• Accommodates considerable axial misalignment
• Seals effectively on oval shafts
• Wide tolerance of shaft sizes

Product Application Information

Typical applications include small electric motors and conveyor rollers. The V-Rings can also be used as a secondary seal to protect primary seals that do not perform well in hostile environments.

//media.rs-online.com/t_line/L749575-01.gif
//media.rs-online.com/t_line/LD749575-01.gif
//media.rs-online.com/t_line/LE749575-01.gif
//media.rs-online.com/t_line/LF749575-99.gif
//media.rs-online.com/t_line/LI749575-01.gif
Specificaties
Kenmerk Waarde
Inside Diameter 40mm
Outside Diameter 53 → 58mm
Thickness 9mm
Type V-Ring Seal
Material Nitrile Rubber
Minimum Operating Temperature -40°C
Maximum Operating Temperature +100°C
100 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
508 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 4)
1,66
(excl. BTW)
2,01
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
4 - 16
1,66 €
6,64 €
20 - 36
1,628 €
6,512 €
40 +
1,595 €
6,38 €
*prijsindicatie
Related Products
RS PRO metric O-Rings made from Nitrile, the ...
Description:
RS PRO metric O-Rings made from Nitrile, the most widely used elastomer in sealing applications. These O-Rings have an excellent resistance to petroleum products and work well in either low or high temperatures. Nitrile is highly resistant to abrasion and ...
Introducing the range of RS PRO Nitrile O-Rings, ...
Description:
Introducing the range of RS PRO Nitrile O-Rings, ideal for use as seals for pumps, drive belts, and other general engineering applications in the hydraulic and pneumatic industry. This O-ring is manufactured from Nitrile rubber (NBR), which is a cost-effective ...
Also known as oil seals, these seals are ...
Description:
Also known as oil seals, these seals are ideal for excluding dirt, dust, water or any other contaminant whilst retaining lubricant in rotary shaft equipment. They are generally used as a means of protecting the bearings of rotating shafts. Replaceable ...
These seals prevent fluid flowing from adjoining housings.This ...
Description:
These seals prevent fluid flowing from adjoining housings.This range performs the dynamic sealing that takes place when two parts move one against the other.These seals for rotating shafts consist of three parts: seal armature, spring and nitrile elastomer.