3M 102 Series, Female 50 Pin Straight Through Hole PCB Socket 1.27mm Pitch, Solder, Quick Latch

  • RS-stocknr. 749-4859
  • Fabrikantnummer 10250-6212PC
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

Straight Panel Mount Through Hole Receptacles 102 Series with Screw Locks

These 3M Mini D Ribbon (MDR) 102 Series PCB shielded receptacles have M2.5 or M2.6 lockdown threads. The design of these MDR 102 Series PCB shielded receptacles incorporates a latching interface for connector stability.

Mates with 101XX-6000 Series Plugs see stock number 163-3285 typical
Mates with 101XX-3000 Series Plugs see stock number 515-7476 typical

N102xx-xxxxxx: High temperature PCT insulator
x102xx-xx0xxx: M2.6 Panel and Screw locks
x102xx-xx1xxx: M2.5 Panel and Screw locks
x102xx-xxxxPC: Contact area Au 0.7 6 μm, Tail area Au flash
x102xx-xxxxPL: Contact area Au 0.2 μm, Tail area Au flash with lubricant treatment

Note

The Pitch quoted refers to the PC tails.

Mini Delta Ribbon (MDR)

Cable mount plugs and PCB mount receptacles with pre-loaded ribbon contacts for long life
Finger releasable latching backshells for cable mounting applications

A Mini Delta Ribbon (MDR) system designed for high density I/O applications on a 1.27mm pitch.

All products adhere to the following specification, with exceptions as noted below.  
Body material: Glass filled polyester (PBT)
Flammability: UL94V-0
Contact material/plating  
Beryllium copper Plating
Class II sockets 0.76μm gold
Cable plugs 0.76μm gold
’D’ connectors 0.76μm gold
Board mount sockets 0.3μm gold
   
Phosphor bronze  
Class III sockets 0.38μm gold
Class II headers 0.76μm gold
Class III headers 0.38μm gold
Transition connectors Tin plated
   
Insulation resistance: 1´109 ohms min. at 500Vdc
Current rating: 1A (headers 2A)
Withstanding voltage 1000V r.m.s.
Temperature range: -55°C to +105°C
   
Performance level:  
Class II 200 mating cycles
Class III 50 mating cycles
Note: 'D' type connectors include steel shells. Latches for Class III headers are of nylon.  
Specificaties
Kenmerk Waarde
Gender Female
Number of Contacts 50
Body Orientation Straight
Mounting Type Through Hole
Contact Material Copper Alloy
Contact Plating Gold over Nickel
Housing Material Zinc Alloy
Pitch 1.27mm
Current Rating 1A
Latch Type Quick Latch
Termination Method Solder
Series 102
Length 52.4mm
Depth 9.1mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -20°C
Width 11mm
57 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
56 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,83
(excl. BTW)
7,05
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
5,83 €
25 - 74
4,82 €
75 - 199
4,59 €
200 +
4,27 €
Verpakkingsopties
Related Products
.050 Series PCI and standard card edge connectors ...
Description:
.050 Series PCI and standard card edge connectors with a 1.27mm pitch and 64 bit Bus width. These .050 Series PCI and standard card edge connectors have 92 Dual position contacts with the following board retention features:Stock number 718-8340 is ...
1.27mm MECF series PCB micro edge card sockets ...
Description:
1.27mm MECF series PCB micro edge card sockets that offer a 28+ Gbps solution with a double row design that accepts up to 100 polarized gold plated contacts. These 1.27mm MECF series micro edge card socket connectors are PCB vertical ...
CompactFlash card header connectors with a 1.27 mm ...
Description:
CompactFlash card header connectors with a 1.27 mm pitch designed for use with industry standard CF (CompactFlash) cards. The CompactFlash card connectors consist of a card guide and holder. The card ejectors can be ordered separately. These CF card connectors ...
AMPLIMITE .050 Series III PCB d-sub receptacle headers ...
Description:
AMPLIMITE .050 Series III PCB d-sub receptacle headers with a compact space saving design and high density D type interface with 1.27 x 2.54 mm contact spacing. These AMPLIMITE .050 Series III PCB mount d-sub connectors have full shielding which ...