3M 102 Series, Female 68 Pin Right Angle Through Hole SCSI Connector 2.54mm Pitch, Solder

  • RS-stocknr. 499-9819
  • Fabrikantnummer 10268-5212PL
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

90° Panel Mount PCB I/O Receptacles

These 3M 102 Series Mini D Ribbon (MDR) Boardmount Shielded Receptacles have a 0.050 inch pitch. The design of these 102 Series Mini D Ribbon (MDR) Boardmount Shielded Receptacles includes an interface latch for improved stability. For the main body/insulation material and mounting variations of these 102 Series Mini D Ribbon (MDR) Boardmount Shielded Receptacles see below.

Mates with cable mounting solder plugs, series stock no. 515-7460
Excellent EMI/ESD protection
PCB mounting right angle sockets with retention by Screw or Ground Locks
Panel retention by Metric or UNC threads

102xx-52xx: Zinc Alloy body
102xx-55xx: PCT Insulator with Steel Nickel plated Shroud
102xx-520x: M2.6 Panel and Screw lock
102xx-521x: M2.5 Panel and Screw lock
102xx-55Bx: M2.5 Panel with Ground lock type 1 (3.8 mm)
102xx-55Fx: M2.6 Panel with Ground lock type 3 (2.3 mm)
102xx-55Gx: M2.5 Panel with Ground lock type 3 (2.3 mm)
102xx-55Hx: #4-40 Panel with Ground lock type 3 (2.3 mm)
102xx-xxx2: 3.9 mm long solder Tail
102xx-xxx3: 2.8 mm long solder Tail

Note

The thickness of the wiping area Gold plating is determined by the Manufacturers Part Number, those ending in PL have 0.2 μm , those ending in PE have 0.5 μm and those ending in PC have 0.76 μm.

//media.rs-online.com/t_line/L299458-01.gif

Standards

IDC

Mini Delta Ribbon (MDR)

Cable mount plugs and PCB mount receptacles with pre-loaded ribbon contacts for long life
Finger releasable latching backshells for cable mounting applications

A Mini Delta Ribbon (MDR) system designed for high density I/O applications on a 1.27mm pitch.

All products adhere to the following specification, with exceptions as noted below.  
Body material: Glass filled polyester (PBT)
Flammability: UL94V-0
Contact material/plating  
Beryllium copper Plating
Class II sockets 0.76μm gold
Cable plugs 0.76μm gold
’D’ connectors 0.76μm gold
Board mount sockets 0.3μm gold
   
Phosphor bronze  
Class III sockets 0.38μm gold
Class II headers 0.76μm gold
Class III headers 0.38μm gold
Transition connectors Tin plated
   
Insulation resistance: 1´109 ohms min. at 500Vdc
Current rating: 1A (headers 2A)
Withstanding voltage 1000V r.m.s.
Temperature range: -55°C to +105°C
   
Performance level:  
Class II 200 mating cycles
Class III 50 mating cycles
Note: 'D' type connectors include steel shells. Latches for Class III headers are of nylon.  
Specificaties
Kenmerk Waarde
Gender Female
Number of Contacts 68
Body Orientation Right Angle
Mounting Type Through Hole
Contact Material Copper Alloy
Contact Plating Gold over Nickel
Housing Material PBT
Pitch 2.54mm
Current Rating 500mA
Voltage Rating 150 V ac, 200 V dc
Termination Method Solder
Series 102
Length 63.8mm
Depth 16.7mm
Maximum Operating Temperature +85°C
Width 9.4mm
Minimum Operating Temperature -55°C
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
14,69
(excl. BTW)
17,77
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
14,69 €
15 - 49
13,57 €
50 - 99
11,91 €
100 - 249
10,28 €
250 +
9,22 €
Related Products
These PEC Series Power Edge Card Interface from ...
Description:
These PEC Series Power Edge Card Interface from Samtec take 0.8 mm thick cards . The one piece contacts of this range of the PEC Series Power Edge Card Interface have Tin plating. The above board height of the PEC ...
2.54mm Crimp Snap Crimp Leaf housings designed for ...
Description:
2.54mm Crimp Snap Crimp Leaf housings designed for high density wire-to-board applications. These 2.54mm Crimp Snap Crimp Leaf housings are made from black GF polyester and have mounting ears. For suitable contacts see stock number 720-0692 typically.
Standard Edge II 2.54 mm high current card ...
Description:
Standard Edge II 2.54 mm high current card edge connectors with a low profile industry standard package designed for high reliability and economy. These Standard Edge II card connectors are designed to connect a daughter card to a motherboard. The ...
Developed to meet current needs within the industry ...
Description:
Developed to meet current needs within the industry (industrial electronics, IT, medical equipment, private communication etc.).Connectors with a pitch of 2.54 mm between rows and UNC 4-40 threaded insert.