Hirose, DX Male 20 Pin Right Angle Through Hole SCSI Connector 1.27mm Pitch, Plug In, Quick Latch

  • RS-stocknr. 162-5697
  • Fabrikantnummer DX10-20S(50)
  • Fabrikant Hirose
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Hirose original 1.27mm pitch High-Density I/O connectors

1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available

Specificaties
Kenmerk Waarde
Gender Male
Number of Contacts 20
Body Orientation Right Angle
Mounting Type Through Hole
Contact Material Copper Alloy
Contact Plating Gold
Housing Material PBT
Pitch 1.27mm
Current Rating 500mA
Voltage Rating 300 V
Latch Type Quick Latch
Termination Method Plug In
Series DX
Length 33.4mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -55°C
Depth 10.5mm
Width 18.3mm
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each
7,45
(excl. BTW)
9,01
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
7,45 €
10 - 24
7,06 €
25 - 49
6,33 €
50 +
5,96 €
Related Products
These 3M 102 Series Mini D Ribbon (MDR) ...
Description:
These 3M 102 Series Mini D Ribbon (MDR) Boardmount Shielded Receptacles have a 0.050 inch (1.27 mm) pitch. The design of these 102 Series Mini D Ribbon (MDR) Boardmount Shielded Receptacles includes an interface latch for improved stability. The material ...
3000 series D type IDC ribbon cable plug ...
Description:
3000 series D type IDC ribbon cable plug connectors with a 1.27mm pitch and a low profile design. These IDC ribbon cable connectors are for use with 26 AWG to 28 AWG wire and 1.27 mm round, flat or jacketed ...
From 3M, this range of 101 Series Mini ...
Description:
From 3M, this range of 101 Series Mini D Ribbon (MDR) Connectors are .050" IDC Wiremount Shielded Plugs. The design of the 101 Series Mini D Ribbon (MDR) Connectors, provides IDC terminations for the individual cores and wiper-on-wiper contact. The ...
The AMPLIMITE .050 series III shielded D-sub cable ...
Description:
The AMPLIMITE .050 series III shielded D-sub cable plugs with a compact design, high density D type interface and a 1.27 x 2.54 mm centreline. These AMPLIMITE .050 series III d-subminiature connectors have a steel shell with a tin nickel ...