Phoenix Contact SUBCON-PLUS/AX/CAN/SO145 Series 2.77mm Pitch 9 Way Straight Female Screw Terminal D-sub Connector

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors

SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
Stock number 648-3502 has a 180° axial cable entry and two cable entries
For suitable screwdriver see stock number 390-9663

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specificaties
Kenmerk Waarde
Gender Female
Number of Contacts 9
Body Orientation Straight
Pitch 2.77mm
Contact Material Copper Alloy
Housing Material Metal Plated ABS
Current Rating 100mA
Voltage Rating 50 V
Dimensions 58.2 x 31.5 x 17mm
Mounting Type Cable Mount
Series SUBCON-PLUS/AX/CAN/SO145
Depth 17mm
Width 31.5mm
Maximum Operating Temperature +75°C
Length 58.2mm
Minimum Operating Temperature -20°C
62 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
43,26
(excl. BTW)
52,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
43,26 €
25 - 74
41,05 €
75 - 199
38,98 €
200 - 399
37,04 €
400 +
35,21 €
Related Products
Suitable for crimp or solder termination contacts, see ...
Description:
Suitable for crimp or solder termination contacts, see stock no's 719-5824 and 719-5833 typicallyThese connector shells offer the possibility of assembly and re-assembly with either crimp or solder contactsHigh quality, crimp and poke or solder and poke connectors in standard ...
Male and female D-Sub connectors with direct screw ...
Description:
Male and female D-Sub connectors with direct screw connectionsThese D-Sub's are all 2 Row Connectors.Easy wiring without the need for any special tool (a standard electrician's screwdriver can be used), ideal for field applicationsApplications: industry (control and automated systems), buildings ...
The compact, high quality 9-way D-sub housings are ...
Description:
The compact, high quality 9-way D-sub housings are available in Bus node or Bus termination versions and are colour coded for ease of identification. For CAN-Bus and Profibus systems, service nodes are also available, enabling programming or 'on-line' servicing to ...
A Phoenix Contact range of rewireable plug connectors ...
Description:
A Phoenix Contact range of rewireable plug connectors specially designed for data technology in an industrial environment. • Push-pull locking mechanism • Contact inserts comprise of a conventional D-Sub connector mated to a PCB containing screw terminals for ease of ...