Phoenix Contact SUBCON-PLUS Series 2.77mm Pitch 9 Way Straight Male Screw Terminal D-sub Connector

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact SUBCON-PLUS PROFIBUS D-Sub Connectors

Phoenix Contact SUBCON-PLUS PROFIBUS 9 pin D-sub connectors are designed for use in PROFIBUS systems up to 12 Mbps allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS PROFIBUS d-sub connectors have an integrated terminating resistor which can be activated externally by a slide switch, surge protection, a shielded ABS housing and can all be used with standard PROFIBUS cables with an outside diameter of 8mm (type A & B)

For PROFIBUS cable quick stripping tool see stock number 801-8967
For cable stripping tool see stock number 803-4326
For screwdriver see stock number 803-4351

SUBCON-PLUS-PROFIB/AX/SC – 2744380

A straight D-SUB connector from Phoenix Contact. The 9-contact connector is part of the SUB-CON PLUS series and is suitable for all Fast Connect PROFIBUS cables and RS-485 bus lines. This male, D-SUB connection is suitable for wire size 16 – 26 AWG.

Features and Benefits

• Male, Screw Terminal
• 9 Copper alloy contacts
• Pitch of 2.77mm
• Metal plated ABS housing
• Operating temperature of -20°C to +75°C

Note

2744380 SUBCON-PLUS-PROFIB/AX/SC

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specificaties
Kenmerk Waarde
Gender Male
Number of Contacts 9
Body Orientation Straight
Pitch 2.77mm
Contact Material Copper Alloy
Housing Material Metal Plated ABS
Current Rating 1A
Voltage Rating 60 V
Dimensions 58.2 x 31.5 x 17mm
Mounting Type Cable Mount
Series SUBCON-PLUS-PROFIB/AX/SC
Depth 17mm
Width 31.5mm
Maximum Operating Temperature +70°C
Length 58.2mm
Minimum Operating Temperature -20°C
23 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
105 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
43,25
(excl. BTW)
52,33
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
43,25 €
25 - 74
41,04 €
75 - 199
39,02 €
200 - 399
37,07 €
400 +
35,21 €
Related Products
Crimp & poke d-subs available in 5 industry ...
Description:
Crimp & poke d-subs available in 5 industry sizes/positionsStandard Density (9 pin, 15 pin, 25 pin, 37 pin, 50 pin).Low cost commercial version of military standard. Nickel or Tin shells.Allows for easy loading of only the positions required.Crimp & Snap-in ...
Suitable for crimp or solder termination contacts, see ...
Description:
Suitable for crimp or solder termination contacts, see stock no's 719-5824 and 719-5833 typicallyThese connector shells offer the possibility of assembly and re-assembly with either crimp or solder contactsHigh quality, crimp and poke or solder and poke connectors in standard ...
A PCB mount Dsub range offering an economical ...
Description:
A PCB mount Dsub range offering an economical solution while retaining a high level of performance and standard featuresStraight connectors for PCB mountingBoardlocks included as standardUL approvedGold (Au) plated contacts 0.38μm9, 15, 25 & 37 way plugs and sockets availableChoice ...
Male and female D-Sub connectors with direct screw ...
Description:
Male and female D-Sub connectors with direct screw connectionsThese D-Sub's are all 2 Row Connectors.Easy wiring without the need for any special tool (a standard electrician's screwdriver can be used), ideal for field applicationsApplications: industry (control and automated systems), buildings ...