Safeball JSTD1 Safety Two Hand Control Switch, Momentary, 2, 2 NO, IP65

  • RS-stocknr. 733-2339
  • Fabrikantnummer 2TLA020007R3400
  • Fabrikant ABB
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Two Hand Control Safeball JSTD1/JSTD25 Series

Safeball is a one hand device which can also be used in pair to create a two hand device. They can be mounted on a table or on aluminium profiles available from ABB Safety. In order to increase the grip and ergonomics, the Safeballs can be mounted on a flexible support or similar device.

JSTD1 is a single hand control device which can be used in a pair to create a two hand controller
JSTD25 is a prepared two hand safety control station which includes two JSTD1's
Complies to safety category 4
High protection class rating of IP65
High mechanical life of 106 cycles
Operation force of 2 N
Actuator travel of 1.3 ± 0.6 mm

Standards

EN 574, EN ISO 13849-1, EN ISO13850, EN 60947-1, EN 60947-5-1, EN 999, IEC 60529

Approvals

TUV, CE

Two Hand Control

Specificaties
Kenmerk Waarde
Range Safeball
Series JSTD1
Contact Configuration 2 NO
Number Of Push Buttons 2
Push Button Actuation Momentary
Housing Material PP
IP Rating IP65
Depth 71mm
Width 72mm
13 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
34 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
97,00
(excl. BTW)
117,37
(incl. BTW)
Aantal stuks
Per stuk
1 +
97,00 €
Related Products
Hinge switch for right-side mountingPivot angle 0° → ...
Description:
Hinge switch for right-side mountingPivot angle 0° → 270°Freely adjustable switch pointIntegrated fine adjustment system makes readjusting easy even after the switch point has been setSwitch point can be reset with a change kitWired or plugged connectionAxial or radial connection ...
A miniature hinge operated safety interlock switch with ...
Description:
A miniature hinge operated safety interlock switch with 2 sets of contacts and a full IP67 ingress rating. Particularly useful for light duty hinged guard doors, covers or flaps. Cam may be adjusted in-situ to assist in accurate installation and ...
The Siemens 3SE2 series safety switch has a ...
Description:
The Siemens 3SE2 series safety switch has a 2NC/1NO contact configuration. It has conduit entry is M12 and size of cable entries is M20 x1.5. This has a glass fibre reinforced thermoplast enclosure. Simple, compact, IP65 door hinge safety switchAdditional ...
For specific hazardous area approval category details please ...
Description:
For specific hazardous area approval category details please refer to the bullet points for each product.,Approval certificates available on request. AC3 switching capacityCan be locked using padlocks in three positionsIP66 ratedTwo M20 cable entries complete with cable glands3 Isolating Poles ...