Safeball JSTD1 Safety Two Hand Control Switch, Momentary, 2, NO/NC, IP65

  • RS-stocknr. 733-2332
  • Fabrikantnummer 2TLA020007R3100
  • Fabrikant ABB
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

ABB One- Hand Control Switch

The ABB JSTD1 series single-hand control switch can be used when the operator cannot reach into the hazardous area with a freehand or on less dangerous machines. It can be mounted on a table or on aluminium profiles available from ABB Safety. To achieve the highest safety level for One-hand control this device must be connected to a safety control system (E.g. safety relay or safety PLC). This safeball can be mounted on flexible support or similar devices, in order to increase the grip and ergonomics.

Features and Benefits

1NO/1NC contact configuration
Cable length is 0.2m

Ergonomic
Low activation force
Flexible mounting
Several grip possibilities
Highest safety level (category 4)
Two-channel switching in each hand
High mechanical life of 106 cycles
Operating force is 2N
Actuator travel of 1.3 ±0.6mm

Certifications

IP67 rated
EN 574
EN ISO 13849-1
EN ISO13850
EN 60947-1
EN 60947-5-1
EN 999
IEC 60529
TUV certified
CE certified
CSA certified

Specificaties
Kenmerk Waarde
Series JSTD1
Range Safeball
Contact Configuration NO/NC
Number Of Push Buttons 2
Push Button Actuation Momentary
Housing Material PP
IP Rating IP65
Depth 71mm
Width 72mm
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
9 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
113,86
(excl. BTW)
137,77
(incl. BTW)
Aantal stuks
Per stuk
1 +
113,86 €
Related Products
RS PRO treadle foot switch is an extended ...
Description:
RS PRO treadle foot switch is an extended foot switch which has been designed to incorporate two non-latching foot switches (see stock no. 316-901) connected in parallel. These switches have been constructed from steel and are extremely reliable. This light ...
The Banner RP-LM40 series rope pull momentary switch ...
Description:
The Banner RP-LM40 series rope pull momentary switch has 2NC contact configuration. The switch returns immediately to the running condition after releasing the rope which follows a pull condition. It can provide machine stop (trip) actuation along with conveyors and ...
The Schmersal TVS400 series safety hinge switch has ...
Description:
The Schmersal TVS400 series safety hinge switch has a 1NO/2NC normal state configuration. The conduit entry is M20 and size of cable entries is M20x1.5. It has a contact current rating of 2A at a voltage rating of 230VAC and ...
The Omron D4N series snap action limit switch ...
Description:
The Omron D4N series snap action limit switch has 1NC/1NO contact configuration and an adjustable roller lever actuator. It has a screw connection and 1-conduit M20 connection. The standardized gold-clad contacts provide high contact reliability. Contact rating is 10A continuousFree ...