Carlo Gavazzi NES 24 V ac/dc Safety Relay

Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Carlo Gavazzi NES Series E-Stop Safety Relay

Carlo Gavazzi NES series Emergency Stop and Safety Gate modules. The NA1 series is characterised by dual channel input and safety output contacts with force guided relay outputs.

Safety Category 4 according to EN 954-1
Category 0 Emergency Stop (EN 60204-1)
2 x 6 A NO safety outputs (NES02D)
3 x 6 A NO safety outputs and 1 x 6 A NC auxiliary output
Automatic / manual or monitored manual reset
Single / double channel operations
LED indication for outputs status and power supply ON
Connection by fixed or detachable terminals

Specificaties
Kenmerk Waarde
Supply Voltage 24 V ac/dc
Width 114mm
Length 22.5mm
Depth 99mm
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
291,04
(excl. BTW)
352,16
(incl. BTW)
Aantal stuks
Per stuk
1 +
291,04 €
Related Products
Can be used with all motors equipped with ...
Description:
Can be used with all motors equipped with PTC thermistor probes. It monitors windings temperature and ensures that the rated operating value is not exceeded, therefore guarding against faults which are often the cause of premature ageing. They can also ...
The Bulletin 100S-C safety contactors provide mechanically linked ...
Description:
The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary ...
Ensures motor movement is at a preset limit ...
Description:
Ensures motor movement is at a preset limit before an output signal is givenFor use with guard locking interlock switchesFault tolerant principle control unitMonitors contactor operationDimensions: H73 x W45 x D120mm.
Monitors the two-hand operation of metal working presses ...
Description:
Monitors the two-hand operation of metal working presses and other processing machines with dangerous lock movementsConforms to amended standard EN574 and therefore safety level III-C for wiring in line with the installation instructions supplied with the device (as at: 02-1997)Safety ...