Pilz 24 V dc Safety Relay Dual Channel With 2 Safety Contacts and 1 Auxilary Contact Compatible With Two-Hand Control

  • RS-stocknr. 362-0174
  • Fabrikantnummer 774350
  • Fabrikant Pilz
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

PILZ P2HZ X3 Safety Relay

The PILZ P2HZ X3 range is an affordable, durable and reliable safety relay designed with two handed control units in mind. Useful when you need to control your press controllers and safety circuits.

Features and benefits

• Specially designed for two handed control/operation. The P2HZ series will not function unless the operator has their hands outside the danger zone area during hazardous movement.
• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)
• Suitable for DIN rail mounting
• Durable and has an extended service life vs. competitors
• Positive guided relay outputs (2 safety contacts, 1 auxiliary)

Safety features

• The relay will provide the circuit self-monitoring.
• The safety functions of the device remain in effect even in the case of component failures.
• The relay will prevent the circuit from further press strokes in the case of, relay failures, contact welding, coil defects or open/short circuits.

Applications

• Mechanical presses
• Hydraulic presses
• General safety circuits (in accordance with EN 60204-1)

Technical safety parameters

• EN 60204-1
• EN 954-1
• EN (IEC) 62061
• EN ISO 13849-1
• IEC 61511 – SIL 3

Standards

EN 60204-1

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Number of Channels 2
Auxiliary Contacts 1
Function Two-Hand Control
Safety Contacts 2
Range PNOZ X
Reset Method Monitored
Terminal Type Screw
Length 87mm
Depth 121mm
Width 22.5mm
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
11 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
328,34
(excl. BTW)
397,29
(incl. BTW)
Aantal stuks
Per stuk
1 +
328,34 €
Related Products
Detects the stop condition of all types of ...
Description:
Detects the stop condition of all types of AC or DC motor driven machines which, when the motor runs down, produce a residual voltage in the windings. No additional sensor is required1 N/O and 1 N/C contacts, EN954-1 Category 3 ...
2 N/O instantaneous outputs provide stop category 0, ...
Description:
2 N/O instantaneous outputs provide stop category 0, 3 N/O timed contacts provide stop category 1 by allowing controlled deceleration of the motor until a complete stop is achieved4 solid state outputs for PLC signallingMonitored start button featureDelay time: 0 ...
Multi-function safety modules / SRB-E-402ST. Two-functions safety monitoring ...
Description:
Multi-function safety modules / SRB-E-402ST. Two-functions safety monitoring module (double evaluation), 2 x STOP 02 x 1 oder 2-channel control2 x Start button / Auto-start1 x Monitoring two-hand control panels to ISO 138512 safety contacts2 Safety outputs.
DIN rail mountingFor use with powered shot bolt ...
Description:
DIN rail mountingFor use with powered shot bolt applicationsTime delay selectable in 12 steps (3-30 secs)1 N/O safety contact, 2 N/C auxiliary contactsFeedback control loop for monitoring of external devices.