Pilz 24 V dc Safety Relay Dual Channel With 8 Safety Contacts and 1 Auxilary Contact Compatible With Expansion Module

  • RS-stocknr. 245-1955
  • Fabrikantnummer 774150
  • Fabrikant Pilz
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

PZE 9 24VDC 8n/o Safety Relay Expansion from PILZ

The PILZ PZE 9, primarily used for increasing the number of contacts you can use between your safety related control devices such as E stops, safety gates and more. The reliability Safety Relay technology from PILZ means you can control your environment with confidence that the safety status is being monitored.

Features and benefits

• Universal power supply, compatible with many different outlets of power sources
• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Plug in terminal connections with either a spring loaded terminal or screw terminal giving you versatility in where your unit can be used.
• Feedback loop monitoring come with all base units allowing you to monitor the safety loop and identify hazards before they happen.
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)

Safety features

• Earth fault in the feedback loop can be detected depending on the base unit that is used
• Earth faults in the input circuit can be detected as the output will de-energise the relays and open the safety contacts.
• The device will retain its safety functions in any case of component failures ensuring your safety.
• Any safety functions in your existing circuit can be easily transferred with this expansion module with ease.
• Detection of shorts across contacts is possible with this expansion model

Applications

• Guard systems
• Emergency stop buttons
• Pull wire emergency stop switches
• Safety light curtains
• Safety sensors

Technical safety parameters

• EN 60204-1
• EN 62061
• EN ISO 13849-1
• VDE 0113-1

Note

All base units must have a feedback control loop

Approvals

60204-1; EN60947-4-1; EN60947-5-1

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Number of Channels 2
Auxiliary Contacts 1
Function Expansion Module
Safety Contacts 8
Range PNOZ X
Terminal Type Screw
Width 90mm
Depth 121mm
Length 87mm
7 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
233,08
(excl. BTW)
282,03
(incl. BTW)
Aantal stuks
Per stuk
1 +
233,08 €
Related Products
Each miniTwin stick contains both the sender and ...
Description:
Each miniTwin stick contains both the sender and receiver elements, each symmetrically mounted in one half of a housing and separated by a central synchronisation beam. The diagram shows two identical miniTwin units offset by 180° working as both sender ...
Safety relay for two-handed controlsDuring dangerous movements, the ...
Description:
Safety relay for two-handed controlsDuring dangerous movements, the relay requires the operator to keep both hands out of the danger zoneApplications: mechanical presses, hydraulic presses, safety control circuitsRemovable terminals with connection via spring terminalsDisplay LEDs for relay statusDIN rail ...
The PNOZ Sigma S4 series of Safety relay ...
Description:
The PNOZ Sigma S4 series of Safety relay by PILZ. Known for their reliability and durability, PILZ safety relays offer you second to none safety protection features to ensure you and your workplace stay safe. Specifically, the S4 series is ...
Stop-Category 0 acc. EN 60204-1Applications up to Category ...
Description:
Stop-Category 0 acc. EN 60204-1Applications up to Category 4 acc. EN 954-1 or to SIL 3 respectively according to EN 62061 and PL e accoring to EN13849-1Can be used as emergency stop and safety gate monitorEach unit offers manual or ...