Pilz 24 V ac/dc Safety Relay Single Channel With 3 Safety Contacts and 1 Auxilary Contact

  • RS-stocknr. 239-1033
  • Fabrikantnummer 774300
  • Fabrikant Pilz
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

PILZ PNOZ X1 Safety Relay, Single Channel

The PNOZ X1 series from PILZ is a reliable and affordable safety relay that will give you the confidence to run your safety circuits in a safe manner.

Features and benefits

• Specially designed for two handed control/operation. The P2HZ series will not function unless the operator has their hands outside the danger zone area during hazardous movement.
• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)
• Suitable for DIN rail mounting
• Durable and has an extended service life vs. competitors

Safety features

• The relay will provide the circuit self-monitoring.
• The safety functions of the device remain in effect even in the case of component failures.
• The correct opening and closing of the safety relays functions are tested automatically at the end of each on/off cycle.

Applications

• Mechanical presses
• Hydraulic presses
• General safety circuits (in accordance with EN 60204-1)
• Emergency stop buttons
• Safety curtains

Technical safety parameters

• EN 60204-1
• EN 954-1
• EN (IEC) 62061
• EN ISO 13849-1
• IEC 61511 – SIL 3

Specificaties
Kenmerk Waarde
Supply Voltage 24 V ac/dc
Number of Channels 1
Auxiliary Contacts 1
Function Safety Switch/Interlock
Safety Contacts 3
Range PNOZ X
Reset Method Automatic, Manual
Terminal Type Screw
Length 87mm
Width 22.5mm
Depth 121mm
24 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
90 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
147,06
(excl. BTW)
177,94
(incl. BTW)
Aantal stuks
Per stuk
1 +
147,06 €
Related Products
Redundant contactors to isolate motor (hazardous motion)Positively guided ...
Description:
Redundant contactors to isolate motor (hazardous motion)Positively guided main contactsRed contact housings for easy identification as safety deviceProtective cover prevents manual operation - yet the window allows visible ON/OFF status.
Stop-Category 0 acc. EN 60204-1Applications up to Category ...
Description:
Stop-Category 0 acc. EN 60204-1Applications up to Category 4 acc. EN 954-1 or to SIL 3 respectively according to EN 62061 and PL e accoring to EN13849-1Can be used as emergency stop and safety gate monitorEach unit offers manual or ...
Ensures correct switching of up to 3 contactors ...
Description:
Ensures correct switching of up to 3 contactors with monitoringFail-safe internal monitoringSingle channel input for use with interlock switches and emergency stop buttons. 3 uncommitted safety output circuits and provides a contactor monitoring facility and auxiliary output for indication purposesPower ...
DIN rail mountingFor use with powered shot bolt ...
Description:
DIN rail mountingFor use with powered shot bolt applicationsTime delay selectable in 12 steps (3-30 secs)1 N/O safety contact, 2 N/C auxiliary contactsFeedback control loop for monitoring of external devices.