Wago 24 V dc Safety Relay With 2 Safety Contacts 2 Auxilary Contacts Compatible With Safety Relay

  • RS-stocknr. 180-3066
  • Fabrikantnummer 788-906
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Relay module, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Green status indicator, Module width: 15 mm

Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Auxiliary Contacts 2
Function Safety Relay
Safety Contacts 2
Terminal Type Cage Clamp
Length 15mm
Depth 64mm
Width 86mm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
40,80
(excl. BTW)
49,37
(incl. BTW)
Aantal stuks
Per stuk
1 +
40,80 €
Related Products
AFS09 ... AFS38 contactors are designed for machine ...
Description:
AFS09 ... AFS38 contactors are designed for machine safety applications. They are delivered with fixed front-mounted auxiliary contact blocks making them ideal for monitoring and controlling circuits. Mechanically linked and mirror contacts make your system safer. - control circuit with ...
Adjustable off delayNo auxiliary voltageOutput: 1 NC, 1 ...
Description:
Adjustable off delayNo auxiliary voltageOutput: 1 NC, 1 force guided NOLED to display switch positionDelayed switch-off in safety-oriented circuits(EU Directive for machines 89/392/EEC, IEC 255, DIN VDE 0435).
Ensures motor movement is at a preset limit ...
Description:
Ensures motor movement is at a preset limit before an output signal is givenFor use with guard locking interlock switchesFault tolerant principle control unitMonitors contactor operationDimensions: H73 x W45 x D120mm.
Monitors the two-hand operation of metal working presses ...
Description:
Monitors the two-hand operation of metal working presses and other processing machines with dangerous lock movementsConforms to amended standard EN574 and therefore safety level III-C for wiring in line with the installation instructions supplied with the device (as at: 02-1997)Safety ...