Wago 788 24 V dc Safety Relay With 2 Safety Contacts and 2 Auxiliary Contacts

  • RS-stocknr. 180-3065
  • Fabrikantnummer 788-384
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Relay module with driven contacts, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Red status indicator, Module width: 15 mm

Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Auxiliary Contacts 2
Function Safety Relay
Safety Contacts 2
Terminal Type Cage Clamp
Length 15mm
Depth 64mm
Width 86mm
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
39 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
42,02
(excl. BTW)
50,84
(incl. BTW)
Aantal stuks
Per stuk
1 +
42,02 €
Related Products
The Bulletin 100S-C safety contactors provide mechanically linked ...
Description:
The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary ...
Ensures motor movement is at a preset limit ...
Description:
Ensures motor movement is at a preset limit before an output signal is givenFor use with guard locking interlock switchesFault tolerant principle control unitMonitors contactor operationDimensions: H73 x W45 x D120mm.
Monitors the two-hand operation of metal working presses ...
Description:
Monitors the two-hand operation of metal working presses and other processing machines with dangerous lock movementsConforms to amended standard EN574 and therefore safety level III-C for wiring in line with the installation instructions supplied with the device (as at: 02-1997)Safety ...
For protecting people and machinesThe BG 5925 is ...
Description:
For protecting people and machinesThe BG 5925 is also suitable for switching small loads thanks to gold-plated contactsEvaluation device for light barriers with self-test functionCompliant with the EC Machines Directive 98/37/EC1 or 2-channel configurationActivation via the ON button or automatic ...