A4EG Series Safety Switch, 3 Position, 2 NO, IP65

  • RS-stocknr. 757-9051
  • Fabrikantnummer A4EG-BM2B041
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

Enabling Switch, A4EG Series

The A4EG enabling grip switch when used in conjunction with the G9SX-GS ensures the safety of machine operators during setting and maintenance operations. The operator can start and stop the machine while movements are being performed at reduced speed using the grip switch and in the event of danger, to give an emergency stop instruction. If the enabling switch is released or if the operators grip tightens the machine will be stopped immediately.

Ergonomic design
Three easily discernable positions
Equipped with conduit connector
Ingress Protection: IP66 for A4EG-C000041; IP65 for A4EG-BE2R041 and A4EG-BM2B041

Enabling Switch

Specificaties
Kenmerk Waarde
Series A4EG
Contact Configuration 2 NO
Number of Positions 3
IP Rating IP65
Housing Material Plastic
Maximum Operating Frequency 60operations/min
Dimensions 277 x 60 x 48 mm
Depth 48mm
Length 277mm
Width 60mm
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
9 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
342,11
(excl. BTW)
413,95
(incl. BTW)
Aantal stuks
Per stuk
1 +
342,11 €
Related Products
Solenoid interlocks demand accurate alignment of actuator and ...
Description:
Solenoid interlocks demand accurate alignment of actuator and device, the patented AZM 200 solenoid interlock from Schmersal eliminates this problem due to newly developed sensor technology. The actuator and interlock can now have an offset of ± 5 mm and ...
XPS-VC switches XY2AU used in conjunction with the ...
Description:
XPS-VC switches XY2AU used in conjunction with the XPS-VC safety relay offer a certified safety solution ensuring the safety of machine operators during setting and maintenance operationsUse while carrying out adjustment of moving partsAllows operators to enable start and stop ...
Hand-operated grip style enabling device. Underneath the rubber ...
Description:
Hand-operated grip style enabling device. Underneath the rubber boot, called the trigger switch, the 440J enabling device has two three-position switches. The contacts are closed when the actuator is in the mid-position (partly depressed). The contacts are open when the ...
The JSHD series from ABB Jokab offers the ...
Description:
The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series ...