JSHD Series Safety Switch, 3 Position, IP65

  • RS-stocknr. 733-2297
  • Fabrikantnummer 2TLA019995R2400
  • Fabrikant ABB Jokab
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Enabling Switch, JSHD Series

The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series from ABB Jokab include a front button (for programme start, low speed, etc), a top button (for programme stop, grip devices, etc),a bottom plate (wide bottom plate for fixing interlocking devices and Eden (non-contact sensor) or narrow bottom plate for more flexible handling), a cable version (straight or spiral cable with connectors or assembled on the device), LED indication and finally the device is designed to work with a safety relay or PLC.

Multiple uses in troubleshooting, test running and programming where no other protection is available or feasible
Key adavntages of the JSHD4 enabling device include it being ergonomic, adaptable and the device provides LED status information
Mechanical life of 1000000 cycles to the middle position
The body material consists of Polyamide 6.6
Operating force of approximately 15 N
High protection class rating of IP65
Insulation resistance of a minimum of 20 MΩ

Approvals

CE, CSA

Enabling Switch

Specificaties
Kenmerk Waarde
Series JSHD
Number of Positions 3
Supply Voltage 50 V
Supply Current 200 mA
IP Rating IP65
Connection Type Cable
Reset Method Push to Release
Housing Material Nylon 6.6
Dimensions 173 x 63 x 74.5 mm
Depth 74.5mm
Length 173mm
Width 63mm
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
360,98
(excl. BTW)
436,79
(incl. BTW)
Aantal stuks
Per stuk
1 +
360,98 €
Related Products
The TLS-ZR GD2 is a power-to-release and the ...
Description:
The TLS-ZR GD2 is a power-to-release and the TLS-ZL GD2 is a power-to-lockunit. In mechanical configuration these new switches are identical to the existing TLS-GD2 family with the exception of an additional RFID door target which is mounted close coupled ...
2 positive opening contacts as standard, on guard ...
Description:
2 positive opening contacts as standard, on guard openingHead rotates in 90° steps giving 8 actuator entry pointsMinimum operating force for positive opening: 15NIngress protection IP671 x cable entry tapped M16 x 1.5 ISO or PG11Actuator needs ordering separately (see ...
Applications:. Schneider Electric introduces the Prevent XY2 SB ...
Description:
Applications:. Schneider Electric introduces the Prevent XY2 SB two-hand control safety for complete site safety. The health and comfort of operators is paramount, resting handrails have been installed for ergonomic comfortability. Simple adjustments can be made when mounted onto a ...
3 positive opening contacts as standard, on guard ...
Description:
3 positive opening contacts as standard, on guard openingHead rotates in 90° steps giving 8 actuator entry pointsMinimum operating force for positive opening: 15NIngress protection IP672 x cable entries tapped M16 x 1.5 ISO or PG11Actuator needs ordering separately (see ...