NX Series Safety Controller

  • RS-stocknr. 862-5749
  • Fabrikantnummer NX-SL3300
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Omron NX Standalone Safety Controller

The NX series safety control units offer simple and flexible design for high-speed, high-precision motion control and safety control in an integrated engineering environment when used in conjunction with the NJ series machine automation controller and the automation software Sysmac Studio. This functionality contributes to productivity improvements and assurance of safety conforming to international standards and rules.

Integrated safety into machine automation possible by connecting with the NX-series EtherCAT Coupler
The Safety CPU Unit controls up to 128 Safety I/O Units
4 or 8 points per Safety Input Unit, the 4-point Safety Input Unit can be directly connected with OMRON Non-contact Switches and Single beam Sensors
2 or 4 points per Safety Output Unit, the 2-point Safety Output Unit is characterized by large output breaking current of 2.0 A
The Safety Units can be freely allocated in any combination with standard NX I/O
Compliant with IEC61131-3
Safety programs can be standardized and reused efficiently by using POUs for design and operation
EN ISO13849-1 (PLe/Safety Category4), IEC 61508 (SIL3) certified
One connection using Safety over EtherCAT (FSoE) protocol enables flexible configuration by mixing the Safety Units with standard NX I/O
Hardware and safety circuits can be configured using the Sysmac Studio (Ver. 1.07)

Specificaties
Kenmerk Waarde
Series NX
Safety Category EN ISO 13849-2, PLe/Cat.4 EN ISO 13849-1
Terminal Type Screw
Width 30mm
Length 100mm
Dimensions 100 x 30 x 71 mm
Depth 71mm
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
339,10
(excl. BTW)
410,31
(incl. BTW)
Aantal stuks
Per stuk
1 +
339,10 €
Related Products
Configurable device capable of centralised monitoring of multiple ...
Description:
Configurable device capable of centralised monitoring of multiple safety functions such as E-stops, safety interlocks, magnetic safety interlocks, two hand controllers, light curtains, zero speed detection, enabling switches. Designed to provide a solution for safety applications requiring conformity to category ...
One system covers both safety-related (E-stop, light curtain ...
Description:
One system covers both safety-related (E-stop, light curtain etc) and standard control functionsEconomical non-expandable solutionSimple wiring means short commissioning timesSimple intuitive programming resulting in time and cost savingFlexible to apply, as only one solution required for applications up to ...
Economical, Type 4 safety light curtain designed for ...
Description:
Economical, Type 4 safety light curtain designed for small assembly machines in ambient operating environments, or where mounting space is limited. Connection to an MSR42 controller (stock number 703-4987), improves flexibility for applications requiring two or three light curtains or ...
The PNOZmulti Mini configurable safety relay from Pilz ...
Description:
The PNOZmulti Mini configurable safety relay from Pilz has an integral LCD display which provides status information and diagnostic messages. This safety controller has all the functions of the established PNOZmulti yet is only a space saving 45mm wide. A ...