Rotary Switch Spacer for use with Rotary Switch

  • RS-stocknr. 352-339
  • Fabrikantnummer PT6528
  • Fabrikant Lorlin
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

PCB Switch Space Kit

This spacer kit is for use with rotary wafer switches.

Kit Contents

• 10 x Insulated Spacers (6.35mm)
• 2 x Front Insulators
• 1 x Rear Driver Shafts (35.25mm)
• 1 x Retaining Strap
• 2 x Tie Rods
• 2 x Push-On Fixings

Specificaties
Kenmerk Waarde
Accessory Type Spacer Kit
For Use With Rotary Switch
510 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1210 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Box of 10)
0,40
(excl. BTW)
0,48
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
10 - 140
0,40 €
4,00 €
150 - 490
0,384 €
3,84 €
500 - 990
0,246 €
2,46 €
1000 - 4990
0,234 €
2,34 €
5000 +
0,224 €
2,24 €
*prijsindicatie
Related Products
This selection of flat switches for direct soldering ...
Description:
This selection of flat switches for direct soldering to printed circuit boards are low profile, with a mounting height of less than 10.4mm. The rotary wafer switches and spacers are stackable up to five wafers per switch, and can be ...
For use where wide separation of wafers or ...
Description:
For use where wide separation of wafers or screens is requiredUse stk no. 352-272 for Miniature shaft assembliesUse stk no. 327-872 & 327-888 for Standard shaft assemblies.
Gold-plated break-before-make contact Two up/down buttonsDecade, BCD and ...
Description:
Gold-plated break-before-make contact Two up/down buttonsDecade, BCD and HexadecimalModules may be separated by spacers and assembled between cheeksH 24mm, W 7.62mm, D 32mmCheeks and spacers available separatelyCut out, 22.5 by [(no. of switches x 7.62) x (no. of spacers x ...