Needle Roller Bearing TLA2020Z, 20mm I.D, 26mm O.D

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

Drawn Cup Needle Roller Bearing

Small radial section height makes this bearing type invaluable in appliactions where space is at a premium
Stands very high loads
Efficient at high speeds
Large grease reservoir

//media.rs-online.com/t_line/L755615-01.gif
//media.rs-online.com/t_line/LF755615-01.gif
Specificaties
Kenmerk Waarde
Inside Diameter 20mm
Outside Diameter 26mm
Roller Bearing Type Needle
Race Width 20mm
Bore Type Parallel
Static Load Rating 24.7kN
Number of Rows 1
Dynamic Load Rating 14.5kN
End Type Open
Maximum Speed - Oil 20000rpm
Maximum Speed - Grease 12000rpm
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
36 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 2)
3,795
(excl. BTW)
4,592
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
3,795 €
7,59 €
10 - 18
3,675 €
7,35 €
20 +
3,56 €
7,12 €
*prijsindicatie
Related Products
SKF Drawn cup needle roller bearings have a ...
Description:
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity. Generally used directly on the shaft, which ...
FAG by Schaeffler tapered roller bearings feature a ...
Description:
FAG by Schaeffler tapered roller bearings feature a high radial and axial load carrying capacity and a large usable speed range. They are efficient at supporting forces and ensure a precise and rigid shaft guidance system due to the large ...
INA from Schaeffler drawn cup needle roller bearings ...
Description:
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete ...
INA from Schaeffler drawn cup roller clutches are ...
Description:
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in ...