Needle Roller Bearing TAFI122420, 12mm I.D, 24mm O.D

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

Needle Roller Bearing with Inner Ring

May be used with or without inner ring, depending on shaft finish and hardness
Space saving design
High load carrying capacity

//media.rs-online.com/t_line/L198917-21.gif
//media.rs-online.com/t_line/LD755873-01.gif
//media.rs-online.com/t_line/LF198917-99.gif
Specificaties
Kenmerk Waarde
Inside Diameter 12mm
Outside Diameter 24mm
Roller Bearing Type Needle
Race Width 20mm
Bore Type Parallel
Static Load Rating 20.4kN
Number of Rows 1
Dynamic Load Rating 15.5kN
End Type Open
Maximum Speed - Oil 25000rpm
Maximum Speed - Grease 15000rpm
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
15,30
(excl. BTW)
18,51
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
15,30 €
5 - 9
14,83 €
10 +
14,35 €
Related Products
SKF needle roller thrust bearings can support heavy ...
Description:
SKF needle roller thrust bearings can support heavy axial loads, are insensitive to shock loads and provide stiff bearing arrangements which require a minimum of axial space. Single direction bearings and can only accommodate axial loads acting in one directionParticularly ...
INA from Schaeffler drawn cup needle roller bearings ...
Description:
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete ...
INA from Schaeffler drawn cup roller clutches are ...
Description:
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in ...
Drawn cup needle roller bearings with open ends ...
Description:
Drawn cup needle roller bearings with open ends and with closed end are needle roller bearings with a very small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a ...