FAG 31308-XL 40mm I.D Taper Roller Bearing, 90mm O.D
- RS-stocknr.:
- 190-8362
- Fabrikantnummer:
- 31308-XL
- Fabrikant:
- FAG
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29/05/2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 62,38
(excl. BTW)
€ 75,48
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 62,38 |
| 5 - 9 | € 58,69 |
| 10 - 24 | € 57,52 |
| 25 + | € 56,20 |
- RS-stocknr.:
- 190-8362
- Fabrikantnummer:
- 31308-XL
- Fabrikant:
- FAG
Datasheets
Wetgeving en conformiteit
Productomschrijving
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Specificaties
Kenmerk | Waarde |
|---|---|
| Inside Diameter | 40mm |
| Outside Diameter | 90mm |
| Roller Bearing Type | Taper |
| Race Width | 25.25mm |
| Bore Type | Tapered |
| Static Load Rating | 83000N |
| Cage Material | Sheet Steel |
| Number of Rows | 1 |
| Dynamic Load Rating | 89000N |
| End Type | Open |
| Fatigue Limit Load | 12400N |