SMC Rodless Actuator CY1SG10-100Z 0.08 kg@ 50 mm

  • RS-stocknr. 885-2234
  • Fabrikantnummer CY1SG10-100Z
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

SMC CDY1S 10-15mm Diameter Cylinder

Cylinder coupled to piston by magnetic force - no seals needed therefore leakage is eliminated
High load capacity
Autoswitch available

Note

If magnet retaining force is exceeded by the load, the carriage may uncouple from the internal magnets. In this situation, the carriage should be pushed to the stroke end by hand (or the piston moved via air pressure) to re-couple the carriage and piston.

Specificaties
Kenmerk Waarde
Bore 10mm
Stroke 100mm
Maximum Operating Pressure 0.7 MPa
Absolute Maximum Pressure 1.5MPa
Cushioning Type Rubber
Port Connection M5 x 0.8
Dimensions 176 x 60 x 34mm
Weight 430g
Width 60mm
Length 176mm
Height 34mm
Size Type Standard
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
384,60
(excl. BTW)
465,37
(incl. BTW)
Aantal stuks
Per stuk
1 +
384,60 €
Related Products
Single and double-acting compact short-stroke cylinders, operating with ...
Description:
Single and double-acting compact short-stroke cylinders, operating with lubricated or non-lubricated filtered compressed air. CO5 series cylinders are easy to install in confined spaces, easy to clean, and offer good corrosion resistance. The cylinders are supplied pre-lubricated (for applications where ...
Basic mechanically coupled rodless cylinder with hard anodized ...
Description:
Basic mechanically coupled rodless cylinder with hard anodized aluminium body. Double acting with magnetic piston as standard. Simple space saving design. Magnetic SensingSpace saving designCommon port locationAdjustable shock absorberModular accessories available Thrust calculated at 5 bar.
The MY1 series rodless actuators are ideally suited ...
Description:
The MY1 series rodless actuators are ideally suited for applications requiring long strokes with a compact size and integrated guide. The series includes four standard models and users can match the applications specific accuracy and load requirements with the appropriate ...
Double acting mechanically jointed rodless cylinder with air ...
Description:
Double acting mechanically jointed rodless cylinder with air cushioning and a magnetic piston as standard. The MY1b-Z provides a simple, compact, reliable method for positioning or moving components and finished parts. These rodless actuators are suitable for a diverse range ...