Igus M10 Female Igumid G Rod End, 10mm Bore Size, 58mm Long , M10 Thread Size, Metric Thread Standard Female

  • RS-stocknr. 311-2998
  • Fabrikantnummer KBRM-10
  • Fabrikant Igus
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Female Thread

Note

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.

//media.rs-online.com/t_line/L311298-01.gif

Rod End & Spherical - Maintenance Free IGUS®

IGUBAL® spherical bearings are self-lubricating, designed to run dry and are maintenance free
The bearings are extremely tolerant to dirt and dust - IGUBAL® can be used in abrasive environments
8 to 20mm bore size
Low weight (20% of equivalent steel)
High rigidity
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30°C to +80°C

Specificaties
Kenmerk Waarde
Connection Size M10 Female
Bore Size 10mm
Static Load Rating 1550N
Overall Length 58mm
Material Igumid G
Connection Thread Size M10
Connection Thread Standard Metric
Maximum Operating Temperature +80°C
Minimum Operating Temperature -30°C
Connection Gender Female
13 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
23 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
6,51
(excl. BTW)
7,88
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
6,51 €
5 - 9
6,32 €
10 +
6,10 €
Related Products
Premium Line Rod Ends low maintenance, lubrication possible ...
Description:
Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing. Rod end housing: forged steel, tempered, case hardened bearing race, ground and lapped, surface galvanizedInner ring: ball bearing steel, hardened, superfine groundLubrication: Polyrex ...
Rod Ends with female thread and PTFE liner. ...
Description:
Rod Ends with female thread and PTFE liner. For use at high dynamic pressure and tension loads in corrosive environments.
Ball: 440C Stainless Steel, heat treated, HRC56 min ...
Description:
Ball: 440C Stainless Steel, heat treated, HRC56 min Precision ground, polishedBody: 304 Stainless steelRace: PTFE compositeSliding contact surfaces: Steel/PTFE composite.
Ball: AISI 52100 bearing Steel, heat treated, HRC56 ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated Body: Carbon steel,clear Zinc plated. Race: BrassSliding contact surfaces: Steel/Brass.