RS PRO M10 x 1.25 Female Steel Rod End, 10mm Bore Size, 57mm Long , M10 x 1.25 Thread Size, Metric Thread Standard

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Female Rod End Bearing

Corrosion-resistant galvanised Zinc coating

Standards

ISO/CETOP RP 103 P/DIN 24335

10-25mm Diameter - Accessories

The following accessories are available for the CETOP Roundline pneumatic actuator range.

Specificaties
Kenmerk Waarde
Connection Size M10 x 1.25 Female
Bore Size 10mm
Static Load Rating 1400N
Overall Length 57mm
Material Steel
Connection Thread Size M10 x 1.25
Connection Thread Standard Metric
Maximum Operating Temperature +150°C
Minimum Operating Temperature -30°C
Connection Gender Female
25 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
15,86
(excl. BTW)
19,19
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
15,86 €
5 - 9
15,38 €
10 +
14,87 €
Related Products
Plastic right angle ball and socket joint with ...
Description:
Plastic right angle ball and socket joint with metal stud High load capacity and low weight Maintenance-free operationTemperature range: -30°C to +80°C.
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Premium Line Rod Ends low maintenance, lubrication possible ...
Description:
Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing. Rod end housing: forged steel, tempered, case hardened bearing race, ground and lapped, surface galvanizedInner ring: ball bearing steel, hardened, superfine groundLubrication: Polyrex ...
Rod Ends with female thread and PTFE liner. ...
Description:
Rod Ends with female thread and PTFE liner. For use at high dynamic pressure and tension loads in corrosive environments.