Fluro M5 x 0.8 Male Galvanized Steel Rod End, 5mm Bore Size, 42mm Long , M5 Thread Size, Metric Thread Standard Male

  • RS-stocknr. 185-2843
  • Fabrikantnummer GASW5
  • Fabrikant Fluro
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Rod Ends with male thread and PTFE liner.

Specificaties
Kenmerk Waarde
Connection Size M5 x 0.8 Male
Bore Size 5mm
Dynamic Load Rating 7.5kN
Static Load Rating 4.3kN
Overall Length 42mm
Material Galvanized Steel
Connection Thread Size M5
Connection Thread Standard Metric
Maximum Operating Temperature +200°C
Minimum Operating Temperature -50°C
Connection Gender Male
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
21,22
(excl. BTW)
25,68
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
21,22 €
5 - 9
20,39 €
10 +
19,98 €
Related Products
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: BrassSliding contact surfaces: Steel/Brass.
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: PTFE compositeSliding contact surfaces: Steel/PTFE composite.
Ball: 440C Stainless Steel, heat treated, HRC56 min ...
Description:
Ball: 440C Stainless Steel, heat treated, HRC56 min Precision ground, polishedBody: 304 Stainless steelRace: PTFE compositeSliding contact surfaces: Steel/PTFE composite.