Aurora Bearing Company Rod End, 0.31in Bore Size, 5/16 in Thread Size, UNF Thread Standard Female

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Body - Alloy Steel, heat treated, protective coated for corrosion resistance.Ball - Alloy steel, heat treated, hard chrome plated.Race - Alloy steel, heat treated, protective coated for corrosion resistance (Low carbon steel with PTFE liners). Units are supplied without grease fittings. Load ratings apply only to rod ends without grease fittings.

Specificaties
Kenmerk Waarde
Bore Size 0.31in
Material Alloy Steel
Connection Thread Size 5/16 in
Connection Thread Standard UNF
Maximum Operating Temperature +250 (AT1400) °F, +325 (AT3200) °F
Minimum Operating Temperature -65 (AT1400, AT3200)°F
Connection Gender Female
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
54,96
(excl. BTW)
66,50
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
54,96 €
5 - 9
52,79 €
10 +
51,75 €
Related Products
Premium Line Rod Ends low maintenance, lubrication possible ...
Description:
Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing. Rod end housing: forged steel, tempered, case hardened bearing race, ground and lapped, surface galvanizedInner ring: ball bearing steel, hardened, superfine groundLubrication: Polyrex ...
Ball: AISI 52100 bearing Steel, heat treated, HRC56 ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated Body: Carbon steel,clear Zinc plated. Race: BrassSliding contact surfaces: Steel/Brass.
SMC C85 pneumatic cylinder foot mounts, available singularly, ...
Description:
SMC C85 pneumatic cylinder foot mounts, available singularly, with one locknut or as a pair. The foot mounts are suitable for use with C85 series single and double-acting C85 pneumatic cylinders.
SMC C85 pneumatic cylinder foot mounts, available singularly, ...
Description:
SMC C85 pneumatic cylinder foot mounts, available singularly, with one locknut or as a pair. The foot mounts are suitable for use with C85 series single and double-acting C85 pneumatic cylinders.