LDK Carbon Steel Rod End, 9.52mm Bore Size, 53.98mm Long , 3/8 in Thread Size, UNF Thread Standard Female

  • RS-stocknr. 185-2564
  • Fabrikantnummer PHSB6L
  • Fabrikant LDK
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: CN
Productomschrijving

Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated
Body: Carbon steel,clear Zinc plated.
Race: Brass
Sliding contact surfaces: Steel/Brass

Specificaties
Kenmerk Waarde
Bore Size 9.52mm
Dynamic Load Rating 8.2kN
Static Load Rating 18.2kN
Overall Length 53.98mm
Material Carbon Steel
Connection Thread Size 3/8 in
Connection Thread Standard UNF
Connection Gender Female
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
16,15
(excl. BTW)
19,54
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
16,15 €
5 - 9
15,53 €
10 +
15,22 €
Related Products
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Premium Line Rod Ends low maintenance, lubrication possible ...
Description:
Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing. Rod end housing: forged steel, tempered, case hardened bearing race, ground and lapped, surface galvanizedInner ring: ball bearing steel, hardened, superfine groundLubrication: Polyrex ...
Premium Line Rod Ends low maintenance, lubrication possible ...
Description:
Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing. Rod end housing: forged steel, tempered, case hardened bearing race, ground and lapped, surface galvanizedInner ring: ball bearing steel, hardened, superfine groundLubrication: Polyrex ...
Rod Ends with female thread and PTFE liner. ...
Description:
Rod Ends with female thread and PTFE liner. For use at high dynamic pressure and tension loads in corrosive environments.